DIY crib rail cover.  (no sew version)  I was looking for a thick cover to protect my lil ones face after she started climbing and falling in her crib. I didn&#39;t find anything to my liking, so I made one!  Supplies: -Foam pool noodle  -Double sided glue tape (found by fabric) -Fabric (about 1 1/2 yards) -Ribbon (thick width &amp; at least 3 feet)   Directions: Cut noodle half way through until you reach the middle hallow part.   Cut fabric to about 5-6 inches longer then your noodle , and about 5-6 inches wider then it&#39;s width.   Line both inner sides with double sided glue tape.   Wrap fabric around noodle and tuck inside, making sure the fabric and glue are well attached.   Add another glue strip on both inner ends of noodle. Pull loose fabric ends over and into inner noodle to form a neat edge.   Place glue strips on 3 or 4 evenly seperated sections of outer part of completed fabric noodle. Adhere ribbon strips to glue.  Let it sit and dry for several hours.   Place on crib rail and tie ribbons to secure.