
/* WARNING: Unknown calling convention -- yet parameter storage is locked */

void usage(void)

{
  pr2serr(
         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"
         );
  return;
}



void FUN_00101215(void)

{
  pr2serr(
         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"
         );
  return;
}


SUB RSP,0x8
LEA RDI,[0x102008]
MOV EAX,0x0
CALL 0x00101070
ADD RSP,0x8
RET
(translation_unit "void FUN_00101215(void)\n\n{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}\n\n" (function_definition "void FUN_00101215(void)\n\n{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" primitive_type (function_declarator "FUN_00101215(void)" identifier (parameter_list "(void)" ( (parameter_declaration "void" primitive_type) ))) (compound_statement "{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" { (expression_statement "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );" (call_expression "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" identifier (argument_list "(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" ( (string_literal ""Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"" " string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence ") ))) ;) (return_statement "return;" return ;) })))
(translation_unit "/* WARNING: Unknown calling convention -- yet parameter storage is locked */\n\nvoid usage(void)\n\n{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}\n\n" comment (function_definition "void usage(void)\n\n{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" primitive_type (function_declarator "usage(void)" identifier (parameter_list "(void)" ( (parameter_declaration "void" primitive_type) ))) (compound_statement "{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" { (expression_statement "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );" (call_expression "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" identifier (argument_list "(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" ( (string_literal ""Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"" " string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence ") ))) ;) (return_statement "return;" return ;) })))
(translation_unit "void FUN_00101215(void)\n\n{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}\n\n" (function_definition "void FUN_00101215(void)\n\n{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" primitive_type (function_declarator "FUN_00101215(void)" identifier (parameter_list "(void)" ( (parameter_declaration "void" primitive_type) ))) (compound_statement "{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" { (expression_statement "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );" (call_expression "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" identifier (argument_list "(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" ( (string_literal ""Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"" " string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence ") ))) ;) (return_statement "return;" return ;) })))
(translation_unit (function_definition TYPE (function_declarator IDENT (parameter_list ( (parameter_declaration TYPE) ))) (compound_statement { (expression_statement (call_expression IDENT (argument_list ( (string_literal " string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence string_content escape_sequence escape_sequence string_content escape_sequence ") ))) ;) (return_statement return ;) })))
(function_definition "void FUN_00101215(void)\n\n{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" (primitive_type "void") (function_declarator "FUN_00101215(void)" (identifier "FUN_00101215") (parameter_list "(void)" (( "(") (parameter_declaration "void" (primitive_type "void")) () ")"))) (compound_statement "{\n  pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );\n  return;\n}" ({ "{") (expression_statement "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         );" (call_expression "pr2serr(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" (identifier "pr2serr") (argument_list "(\n         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"\n         )" (( "(") (string_literal ""Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"" (" """) (string_content "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]") (escape_sequence "\n") (string_content "                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]") (escape_sequence "\n") (string_content "                [--start] [--stop] [--verbose] [--version] DEVICE") (escape_sequence "\n") (string_content "  where:") (escape_sequence "\n") (string_content "    --eject|-e      stop unit then eject the medium") (escape_sequence "\n") (string_content "    --fl=FL|-f FL    format layer number (mmc5)") (escape_sequence "\n") (string_content "    --help|-h       print usage message then exit") (escape_sequence "\n") (string_content "    --immed|-i      device should return control after receiving cdb,") (escape_sequence "\n") (string_content "                    default action is to wait until action is complete") (escape_sequence "\n") (string_content "    --load|-l       load medium then start the unit") (escape_sequence "\n") (string_content "    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;") (escape_sequence "\n") (string_content "                    load when START bit also set, else eject") (escape_sequence "\n") (string_content "    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)") (escape_sequence "\n") (string_content "    --noflush|-n    no flush prior to operation that limits access (sbc)") (escape_sequence "\n") (string_content "    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,") (escape_sequence "\n") (string_content "                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)") (escape_sequence "\n") (string_content "    --readonly|-r    open DEVICE read-only (def: read-write)") (escape_sequence "\n") (string_content "                     recommended if DEVICE is ATA disk") (escape_sequence "\n") (string_content "    --start|-s      start unit, corresponds to START bit in cdb,") (escape_sequence "\n") (string_content "                    default (START=1) if no other options given") (escape_sequence "\n") (string_content "    --stop|-S       stop unit (e.g. spin down disk)") (escape_sequence "\n") (string_content "    --verbose|-v    increase verbosity") (escape_sequence "\n") (string_content "    --old|-O        use old interface (use as first option)") (escape_sequence "\n") (string_content "    --version|-V    print version string then exit") (escape_sequence "\n") (escape_sequence "\n") (string_content "    Example: ") (escape_sequence "\'") (string_content "sg_start --stop /dev/sdb") (escape_sequence "\'") (string_content "    stops unit") (escape_sequence "\n") (string_content "             ") (escape_sequence "\'") (string_content "sg_start --eject /dev/scd0") (escape_sequence "\'") (string_content "  stops unit and ejects medium") (escape_sequence "\n") (escape_sequence "\n") (string_content "Performs a SCSI START STOP UNIT command") (escape_sequence "\n") (" """)) () ")"))) (; ";")) (return_statement "return;" (return "return") (; ";")) (} "}")))

/* WARNING: Unknown calling convention -- yet parameter storage is locked */

void function_1(void)

{
  var_1(
         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"
         );
  return;
}


(translation_unit (function_definition type: (primitive_type) declarator: (function_declarator declarator: (identifier) parameters: (parameter_list (parameter_declaration type: (primitive_type)))) body: (compound_statement (expression_statement (call_expression function: (identifier) arguments: (argument_list (string_literal (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (string_content) (escape_sequence) (escape_sequence) (string_content) (escape_sequence))))) (return_statement))))

void MASKED(void)

{
  pr2serr(
         "Usage: sg_start [--eject] [--fl=FL] [--help] [--immed] [--load] [--loej]\n                [--mod=PC_MOD] [--noflush] [--pc=PC] [--readonly]\n                [--start] [--stop] [--verbose] [--version] DEVICE\n  where:\n    --eject|-e      stop unit then eject the medium\n    --fl=FL|-f FL    format layer number (mmc5)\n    --help|-h       print usage message then exit\n    --immed|-i      device should return control after receiving cdb,\n                    default action is to wait until action is complete\n    --load|-l       load medium then start the unit\n    --loej|-L       load or eject, corresponds to LOEJ bit in cdb;\n                    load when START bit also set, else eject\n    --mod=PC_MOD|-m PC_MOD    power condition modifier (def: 0) (sbc)\n    --noflush|-n    no flush prior to operation that limits access (sbc)\n    --pc=PC|-p PC    power condition: 0 (default) -> no power condition,\n                    1 -> active, 2 -> idle, 3 -> standby, 5 -> sleep (mmc)\n    --readonly|-r    open DEVICE read-only (def: read-write)\n                     recommended if DEVICE is ATA disk\n    --start|-s      start unit, corresponds to START bit in cdb,\n                    default (START=1) if no other options given\n    --stop|-S       stop unit (e.g. spin down disk)\n    --verbose|-v    increase verbosity\n    --old|-O        use old interface (use as first option)\n    --version|-V    print version string then exit\n\n    Example: \'sg_start --stop /dev/sdb\'    stops unit\n             \'sg_start --eject /dev/scd0\'  stops unit and ejects medium\n\nPerforms a SCSI START STOP UNIT command\n"
         );
  return;
}

