task_id
stringlengths 11
13
| prompt
stringlengths 115
1.36k
| canonical_solution
stringlengths 16
864
| test
stringlengths 117
1.8k
| entry_point
stringlengths 1
30
| content
stringlengths 134
2k
|
|---|---|---|---|---|---|
HumanEval/41
|
def car_race_collision(n: int):
"""
Imagine a road that's a perfectly straight infinitely long line.
n cars are driving left to right; simultaneously, a different set of n cars
are driving right to left. The two sets of cars start out being very far from
each other. All cars move in the same speed. Two cars are said to collide
when a car that's moving left to right hits a car that's moving right to left.
However, the cars are infinitely sturdy and strong; as a result, they continue moving
in their trajectory as if they did not collide.
This function outputs the number of such collisions.
"""
|
return n**2
|
METADATA = {}
def check(candidate):
assert candidate(2) == 4
assert candidate(3) == 9
assert candidate(4) == 16
assert candidate(8) == 64
assert candidate(10) == 100
|
car_race_collision
|
def car_race_collision(n: int):
"""
Imagine a road that's a perfectly straight infinitely long line.
n cars are driving left to right; simultaneously, a different set of n cars
are driving right to left. The two sets of cars start out being very far from
each other. All cars move in the same speed. Two cars are said to collide
when a car that's moving left to right hits a car that's moving right to left.
However, the cars are infinitely sturdy and strong; as a result, they continue moving
in their trajectory as if they did not collide.
This function outputs the number of such collisions.
"""
return n**2
|
HumanEval/42
|
def incr_list(l: list):
"""Return list with elements incremented by 1.
>>> incr_list([1, 2, 3])
[2, 3, 4]
>>> incr_list([5, 3, 5, 2, 3, 3, 9, 0, 123])
[6, 4, 6, 3, 4, 4, 10, 1, 124]
"""
|
return [(e + 1) for e in l]
|
METADATA = {}
def check(candidate):
assert candidate([]) == []
assert candidate([3, 2, 1]) == [4, 3, 2]
assert candidate([5, 2, 5, 2, 3, 3, 9, 0, 123]) == [6, 3, 6, 3, 4, 4, 10, 1, 124]
|
incr_list
|
def incr_list(l: list):
"""Return list with elements incremented by 1.
>>> incr_list([1, 2, 3])
[2, 3, 4]
>>> incr_list([5, 3, 5, 2, 3, 3, 9, 0, 123])
[6, 4, 6, 3, 4, 4, 10, 1, 124]
"""
return [(e + 1) for e in l]
|
HumanEval/43
|
def pairs_sum_to_zero(l):
"""
pairs_sum_to_zero takes a list of integers as an input.
it returns True if there are two distinct elements in the list that
sum to zero, and False otherwise.
>>> pairs_sum_to_zero([1, 3, 5, 0])
False
>>> pairs_sum_to_zero([1, 3, -2, 1])
False
>>> pairs_sum_to_zero([1, 2, 3, 7])
False
>>> pairs_sum_to_zero([2, 4, -5, 3, 5, 7])
True
>>> pairs_sum_to_zero([1])
False
"""
|
for i, l1 in enumerate(l):
for j in range(i + 1, len(l)):
if l1 + l[j] == 0:
return True
return False
|
METADATA = {}
def check(candidate):
assert candidate([1, 3, 5, 0]) == False
assert candidate([1, 3, -2, 1]) == False
assert candidate([1, 2, 3, 7]) == False
assert candidate([2, 4, -5, 3, 5, 7]) == True
assert candidate([1]) == False
assert candidate([-3, 9, -1, 3, 2, 30]) == True
assert candidate([-3, 9, -1, 3, 2, 31]) == True
assert candidate([-3, 9, -1, 4, 2, 30]) == False
assert candidate([-3, 9, -1, 4, 2, 31]) == False
|
pairs_sum_to_zero
|
def pairs_sum_to_zero(l):
"""
pairs_sum_to_zero takes a list of integers as an input.
it returns True if there are two distinct elements in the list that
sum to zero, and False otherwise.
>>> pairs_sum_to_zero([1, 3, 5, 0])
False
>>> pairs_sum_to_zero([1, 3, -2, 1])
False
>>> pairs_sum_to_zero([1, 2, 3, 7])
False
>>> pairs_sum_to_zero([2, 4, -5, 3, 5, 7])
True
>>> pairs_sum_to_zero([1])
False
"""
for i, l1 in enumerate(l):
for j in range(i + 1, len(l)):
if l1 + l[j] == 0:
return True
return False
|
HumanEval/44
|
def change_base(x: int, base: int):
"""Change numerical base of input number x to base.
return string representation after the conversion.
base numbers are less than 10.
>>> change_base(8, 3)
'22'
>>> change_base(8, 2)
'1000'
>>> change_base(7, 2)
'111'
"""
|
ret = ""
while x > 0:
ret = str(x % base) + ret
x //= base
return ret
|
METADATA = {}
def check(candidate):
assert candidate(8, 3) == "22"
assert candidate(9, 3) == "100"
assert candidate(234, 2) == "11101010"
assert candidate(16, 2) == "10000"
assert candidate(8, 2) == "1000"
assert candidate(7, 2) == "111"
for x in range(2, 8):
assert candidate(x, x + 1) == str(x)
|
change_base
|
def change_base(x: int, base: int):
"""Change numerical base of input number x to base.
return string representation after the conversion.
base numbers are less than 10.
>>> change_base(8, 3)
'22'
>>> change_base(8, 2)
'1000'
>>> change_base(7, 2)
'111'
"""
ret = ""
while x > 0:
ret = str(x % base) + ret
x //= base
return ret
|
HumanEval/45
|
def triangle_area(a, h):
"""Given length of a side and high return area for a triangle.
>>> triangle_area(5, 3)
7.5
"""
|
return a * h / 2.0
|
METADATA = {}
def check(candidate):
assert candidate(5, 3) == 7.5
assert candidate(2, 2) == 2.0
assert candidate(10, 8) == 40.0
|
triangle_area
|
def triangle_area(a, h):
"""Given length of a side and high return area for a triangle.
>>> triangle_area(5, 3)
7.5
"""
return a * h / 2.0
|
HumanEval/46
|
def fib4(n: int):
"""The Fib4 number sequence is a sequence similar to the Fibbonacci sequnece that's defined as follows:
fib4(0) -> 0
fib4(1) -> 0
fib4(2) -> 2
fib4(3) -> 0
fib4(n) -> fib4(n-1) + fib4(n-2) + fib4(n-3) + fib4(n-4).
Please write a function to efficiently compute the n-th element of the fib4 number sequence. Do not use recursion.
>>> fib4(5)
4
>>> fib4(6)
8
>>> fib4(7)
14
"""
|
results = [0, 0, 2, 0]
if n < 4:
return results[n]
for _ in range(4, n + 1):
results.append(results[-1] + results[-2] + results[-3] + results[-4])
results.pop(0)
return results[-1]
|
METADATA = {}
def check(candidate):
assert candidate(5) == 4
assert candidate(8) == 28
assert candidate(10) == 104
assert candidate(12) == 386
|
fib4
|
def fib4(n: int):
"""The Fib4 number sequence is a sequence similar to the Fibbonacci sequnece that's defined as follows:
fib4(0) -> 0
fib4(1) -> 0
fib4(2) -> 2
fib4(3) -> 0
fib4(n) -> fib4(n-1) + fib4(n-2) + fib4(n-3) + fib4(n-4).
Please write a function to efficiently compute the n-th element of the fib4 number sequence. Do not use recursion.
>>> fib4(5)
4
>>> fib4(6)
8
>>> fib4(7)
14
"""
results = [0, 0, 2, 0]
if n < 4:
return results[n]
for _ in range(4, n + 1):
results.append(results[-1] + results[-2] + results[-3] + results[-4])
results.pop(0)
return results[-1]
|
HumanEval/47
|
def median(l: list):
"""Return median of elements in the list l.
>>> median([3, 1, 2, 4, 5])
3
>>> median([-10, 4, 6, 1000, 10, 20])
15.0
"""
|
l = sorted(l)
if len(l) % 2 == 1:
return l[len(l) // 2]
else:
return (l[len(l) // 2 - 1] + l[len(l) // 2]) / 2.0
|
METADATA = {}
def check(candidate):
assert candidate([3, 1, 2, 4, 5]) == 3
assert candidate([-10, 4, 6, 1000, 10, 20]) == 8.0
assert candidate([5]) == 5
assert candidate([6, 5]) == 5.5
assert candidate([8, 1, 3, 9, 9, 2, 7]) == 7
|
median
|
def median(l: list):
"""Return median of elements in the list l.
>>> median([3, 1, 2, 4, 5])
3
>>> median([-10, 4, 6, 1000, 10, 20])
15.0
"""
l = sorted(l)
if len(l) % 2 == 1:
return l[len(l) // 2]
else:
return (l[len(l) // 2 - 1] + l[len(l) // 2]) / 2.0
|
HumanEval/48
|
def is_palindrome(text: str):
"""
Checks if given string is a palindrome
>>> is_palindrome('')
True
>>> is_palindrome('aba')
True
>>> is_palindrome('aaaaa')
True
>>> is_palindrome('zbcd')
False
"""
|
for i in range(len(text)):
if text[i] != text[len(text) - 1 - i]:
return False
return True
|
METADATA = {}
def check(candidate):
assert candidate('') == True
assert candidate('aba') == True
assert candidate('aaaaa') == True
assert candidate('zbcd') == False
assert candidate('xywyx') == True
assert candidate('xywyz') == False
assert candidate('xywzx') == False
|
is_palindrome
|
def is_palindrome(text: str):
"""
Checks if given string is a palindrome
>>> is_palindrome('')
True
>>> is_palindrome('aba')
True
>>> is_palindrome('aaaaa')
True
>>> is_palindrome('zbcd')
False
"""
for i in range(len(text)):
if text[i] != text[len(text) - 1 - i]:
return False
return True
|
HumanEval/49
|
def modp(n: int, p: int):
"""Return 2^n modulo p (be aware of numerics).
>>> modp(3, 5)
3
>>> modp(1101, 101)
2
>>> modp(0, 101)
1
>>> modp(3, 11)
8
>>> modp(100, 101)
1
"""
|
ret = 1
for i in range(n):
ret = (2 * ret) % p
return ret
|
METADATA = {}
def check(candidate):
assert candidate(3, 5) == 3
assert candidate(1101, 101) == 2
assert candidate(0, 101) == 1
assert candidate(3, 11) == 8
assert candidate(100, 101) == 1
assert candidate(30, 5) == 4
assert candidate(31, 5) == 3
|
modp
|
def modp(n: int, p: int):
"""Return 2^n modulo p (be aware of numerics).
>>> modp(3, 5)
3
>>> modp(1101, 101)
2
>>> modp(0, 101)
1
>>> modp(3, 11)
8
>>> modp(100, 101)
1
"""
ret = 1
for i in range(n):
ret = (2 * ret) % p
return ret
|
HumanEval/5
|
from typing import List
def intersperse(numbers: List[int], delimeter: int) -> List[int]:
""" Insert a number 'delimeter' between every two consecutive elements of input list `numbers'
>>> intersperse([], 4)
[]
>>> intersperse([1, 2, 3], 4)
[1, 4, 2, 4, 3]
"""
|
if not numbers:
return []
result = []
for n in numbers[:-1]:
result.append(n)
result.append(delimeter)
result.append(numbers[-1])
return result
|
METADATA = {
'author': 'jt',
'dataset': 'test'
}
def check(candidate):
assert candidate([], 7) == []
assert candidate([5, 6, 3, 2], 8) == [5, 8, 6, 8, 3, 8, 2]
assert candidate([2, 2, 2], 2) == [2, 2, 2, 2, 2]
|
intersperse
|
from typing import List
def intersperse(numbers: List[int], delimeter: int) -> List[int]:
""" Insert a number 'delimeter' between every two consecutive elements of input list `numbers'
>>> intersperse([], 4)
[]
>>> intersperse([1, 2, 3], 4)
[1, 4, 2, 4, 3]
"""
if not numbers:
return []
result = []
for n in numbers[:-1]:
result.append(n)
result.append(delimeter)
result.append(numbers[-1])
return result
|
HumanEval/50
|
def encode_shift(s: str):
"""
returns encoded string by shifting every character by 5 in the alphabet.
"""
return "".join([chr(((ord(ch) + 5 - ord("a")) % 26) + ord("a")) for ch in s])
def decode_shift(s: str):
"""
takes as input string encoded with encode_shift function. Returns decoded string.
"""
|
return "".join([chr(((ord(ch) - 5 - ord("a")) % 26) + ord("a")) for ch in s])
|
METADATA = {}
def check(candidate):
from random import randint, choice
import copy
import string
letters = string.ascii_lowercase
for _ in range(100):
str = ''.join(choice(letters) for i in range(randint(10, 20)))
encoded_str = encode_shift(str)
assert candidate(copy.deepcopy(encoded_str)) == str
|
decode_shift
|
def encode_shift(s: str):
"""
returns encoded string by shifting every character by 5 in the alphabet.
"""
return "".join([chr(((ord(ch) + 5 - ord("a")) % 26) + ord("a")) for ch in s])
def decode_shift(s: str):
"""
takes as input string encoded with encode_shift function. Returns decoded string.
"""
return "".join([chr(((ord(ch) - 5 - ord("a")) % 26) + ord("a")) for ch in s])
|
HumanEval/51
|
def remove_vowels(text):
"""
remove_vowels is a function that takes string and returns string without vowels.
>>> remove_vowels('')
''
>>> remove_vowels("abcdef\nghijklm")
'bcdf\nghjklm'
>>> remove_vowels('abcdef')
'bcdf'
>>> remove_vowels('aaaaa')
''
>>> remove_vowels('aaBAA')
'B'
>>> remove_vowels('zbcd')
'zbcd'
"""
|
return "".join([s for s in text if s.lower() not in ["a", "e", "i", "o", "u"]])
|
METADATA = {}
def check(candidate):
assert candidate('') == ''
assert candidate("abcdef\nghijklm") == 'bcdf\nghjklm'
assert candidate('fedcba') == 'fdcb'
assert candidate('eeeee') == ''
assert candidate('acBAA') == 'cB'
assert candidate('EcBOO') == 'cB'
assert candidate('ybcd') == 'ybcd'
|
remove_vowels
|
def remove_vowels(text):
"""
remove_vowels is a function that takes string and returns string without vowels.
>>> remove_vowels('')
''
>>> remove_vowels("abcdef\nghijklm")
'bcdf\nghjklm'
>>> remove_vowels('abcdef')
'bcdf'
>>> remove_vowels('aaaaa')
''
>>> remove_vowels('aaBAA')
'B'
>>> remove_vowels('zbcd')
'zbcd'
"""
return "".join([s for s in text if s.lower() not in ["a", "e", "i", "o", "u"]])
|
HumanEval/52
|
def below_threshold(l: list, t: int):
"""Return True if all numbers in the list l are below threshold t.
>>> below_threshold([1, 2, 4, 10], 100)
True
>>> below_threshold([1, 20, 4, 10], 5)
False
"""
|
for e in l:
if e >= t:
return False
return True
|
METADATA = {}
def check(candidate):
assert candidate([1, 2, 4, 10], 100)
assert not candidate([1, 20, 4, 10], 5)
assert candidate([1, 20, 4, 10], 21)
assert candidate([1, 20, 4, 10], 22)
assert candidate([1, 8, 4, 10], 11)
assert not candidate([1, 8, 4, 10], 10)
|
below_threshold
|
def below_threshold(l: list, t: int):
"""Return True if all numbers in the list l are below threshold t.
>>> below_threshold([1, 2, 4, 10], 100)
True
>>> below_threshold([1, 20, 4, 10], 5)
False
"""
for e in l:
if e >= t:
return False
return True
|
HumanEval/53
|
def add(x: int, y: int):
"""Add two numbers x and y
>>> add(2, 3)
5
>>> add(5, 7)
12
"""
|
return x + y
|
METADATA = {}
def check(candidate):
import random
assert candidate(0, 1) == 1
assert candidate(1, 0) == 1
assert candidate(2, 3) == 5
assert candidate(5, 7) == 12
assert candidate(7, 5) == 12
for i in range(100):
x, y = random.randint(0, 1000), random.randint(0, 1000)
assert candidate(x, y) == x + y
|
add
|
def add(x: int, y: int):
"""Add two numbers x and y
>>> add(2, 3)
5
>>> add(5, 7)
12
"""
return x + y
|
HumanEval/54
|
def same_chars(s0: str, s1: str):
"""
Check if two words have the same characters.
>>> same_chars('eabcdzzzz', 'dddzzzzzzzddeddabc')
True
>>> same_chars('abcd', 'dddddddabc')
True
>>> same_chars('dddddddabc', 'abcd')
True
>>> same_chars('eabcd', 'dddddddabc')
False
>>> same_chars('abcd', 'dddddddabce')
False
>>> same_chars('eabcdzzzz', 'dddzzzzzzzddddabc')
False
"""
|
return set(s0) == set(s1)
|
METADATA = {}
def check(candidate):
assert candidate('eabcdzzzz', 'dddzzzzzzzddeddabc') == True
assert candidate('abcd', 'dddddddabc') == True
assert candidate('dddddddabc', 'abcd') == True
assert candidate('eabcd', 'dddddddabc') == False
assert candidate('abcd', 'dddddddabcf') == False
assert candidate('eabcdzzzz', 'dddzzzzzzzddddabc') == False
assert candidate('aabb', 'aaccc') == False
|
same_chars
|
def same_chars(s0: str, s1: str):
"""
Check if two words have the same characters.
>>> same_chars('eabcdzzzz', 'dddzzzzzzzddeddabc')
True
>>> same_chars('abcd', 'dddddddabc')
True
>>> same_chars('dddddddabc', 'abcd')
True
>>> same_chars('eabcd', 'dddddddabc')
False
>>> same_chars('abcd', 'dddddddabce')
False
>>> same_chars('eabcdzzzz', 'dddzzzzzzzddddabc')
False
"""
return set(s0) == set(s1)
|
HumanEval/55
|
def fib(n: int):
"""Return n-th Fibonacci number.
>>> fib(10)
55
>>> fib(1)
1
>>> fib(8)
21
"""
|
if n == 0:
return 0
if n == 1:
return 1
return fib(n - 1) + fib(n - 2)
|
METADATA = {}
def check(candidate):
assert candidate(10) == 55
assert candidate(1) == 1
assert candidate(8) == 21
assert candidate(11) == 89
assert candidate(12) == 144
|
fib
|
def fib(n: int):
"""Return n-th Fibonacci number.
>>> fib(10)
55
>>> fib(1)
1
>>> fib(8)
21
"""
if n == 0:
return 0
if n == 1:
return 1
return fib(n - 1) + fib(n - 2)
|
HumanEval/56
|
def correct_bracketing(brackets: str):
""" brackets is a string of "<" and ">".
return True if every opening bracket has a corresponding closing bracket.
>>> correct_bracketing("<")
False
>>> correct_bracketing("<>")
True
>>> correct_bracketing("<<><>>")
True
>>> correct_bracketing("><<>")
False
"""
|
depth = 0
for b in brackets:
if b == "<":
depth += 1
else:
depth -= 1
if depth < 0:
return False
return depth == 0
|
METADATA = {}
def check(candidate):
assert candidate("<>")
assert candidate("<<><>>")
assert candidate("<><><<><>><>")
assert candidate("<><><<<><><>><>><<><><<>>>")
assert not candidate("<<<><>>>>")
assert not candidate("><<>")
assert not candidate("<")
assert not candidate("<<<<")
assert not candidate(">")
assert not candidate("<<>")
assert not candidate("<><><<><>><>><<>")
assert not candidate("<><><<><>><>>><>")
|
correct_bracketing
|
def correct_bracketing(brackets: str):
""" brackets is a string of "<" and ">".
return True if every opening bracket has a corresponding closing bracket.
>>> correct_bracketing("<")
False
>>> correct_bracketing("<>")
True
>>> correct_bracketing("<<><>>")
True
>>> correct_bracketing("><<>")
False
"""
depth = 0
for b in brackets:
if b == "<":
depth += 1
else:
depth -= 1
if depth < 0:
return False
return depth == 0
|
HumanEval/57
|
def monotonic(l: list):
"""Return True is list elements are monotonically increasing or decreasing.
>>> monotonic([1, 2, 4, 20])
True
>>> monotonic([1, 20, 4, 10])
False
>>> monotonic([4, 1, 0, -10])
True
"""
|
if l == sorted(l) or l == sorted(l, reverse=True):
return True
return False
|
METADATA = {}
def check(candidate):
assert candidate([1, 2, 4, 10]) == True
assert candidate([1, 2, 4, 20]) == True
assert candidate([1, 20, 4, 10]) == False
assert candidate([4, 1, 0, -10]) == True
assert candidate([4, 1, 1, 0]) == True
assert candidate([1, 2, 3, 2, 5, 60]) == False
assert candidate([1, 2, 3, 4, 5, 60]) == True
assert candidate([9, 9, 9, 9]) == True
|
monotonic
|
def monotonic(l: list):
"""Return True is list elements are monotonically increasing or decreasing.
>>> monotonic([1, 2, 4, 20])
True
>>> monotonic([1, 20, 4, 10])
False
>>> monotonic([4, 1, 0, -10])
True
"""
if l == sorted(l) or l == sorted(l, reverse=True):
return True
return False
|
HumanEval/58
|
def common(l1: list, l2: list):
"""Return sorted unique common elements for two lists.
>>> common([1, 4, 3, 34, 653, 2, 5], [5, 7, 1, 5, 9, 653, 121])
[1, 5, 653]
>>> common([5, 3, 2, 8], [3, 2])
[2, 3]
"""
|
ret = set()
for e1 in l1:
for e2 in l2:
if e1 == e2:
ret.add(e1)
return sorted(list(ret))
|
METADATA = {}
def check(candidate):
assert candidate([1, 4, 3, 34, 653, 2, 5], [5, 7, 1, 5, 9, 653, 121]) == [1, 5, 653]
assert candidate([5, 3, 2, 8], [3, 2]) == [2, 3]
assert candidate([4, 3, 2, 8], [3, 2, 4]) == [2, 3, 4]
assert candidate([4, 3, 2, 8], []) == []
|
common
|
def common(l1: list, l2: list):
"""Return sorted unique common elements for two lists.
>>> common([1, 4, 3, 34, 653, 2, 5], [5, 7, 1, 5, 9, 653, 121])
[1, 5, 653]
>>> common([5, 3, 2, 8], [3, 2])
[2, 3]
"""
ret = set()
for e1 in l1:
for e2 in l2:
if e1 == e2:
ret.add(e1)
return sorted(list(ret))
|
HumanEval/59
|
def largest_prime_factor(n: int):
"""Return the largest prime factor of n. Assume n > 1 and is not a prime.
>>> largest_prime_factor(13195)
29
>>> largest_prime_factor(2048)
2
"""
|
def is_prime(k):
if k < 2:
return False
for i in range(2, k - 1):
if k % i == 0:
return False
return True
largest = 1
for j in range(2, n + 1):
if n % j == 0 and is_prime(j):
largest = max(largest, j)
return largest
|
METADATA = {}
def check(candidate):
assert candidate(15) == 5
assert candidate(27) == 3
assert candidate(63) == 7
assert candidate(330) == 11
assert candidate(13195) == 29
|
largest_prime_factor
|
def largest_prime_factor(n: int):
"""Return the largest prime factor of n. Assume n > 1 and is not a prime.
>>> largest_prime_factor(13195)
29
>>> largest_prime_factor(2048)
2
"""
def is_prime(k):
if k < 2:
return False
for i in range(2, k - 1):
if k % i == 0:
return False
return True
largest = 1
for j in range(2, n + 1):
if n % j == 0 and is_prime(j):
largest = max(largest, j)
return largest
|
HumanEval/6
|
from typing import List
def parse_nested_parens(paren_string: str) -> List[int]:
""" Input to this function is a string represented multiple groups for nested parentheses separated by spaces.
For each of the group, output the deepest level of nesting of parentheses.
E.g. (()()) has maximum two levels of nesting while ((())) has three.
>>> parse_nested_parens('(()()) ((())) () ((())()())')
[2, 3, 1, 3]
"""
|
def parse_paren_group(s):
depth = 0
max_depth = 0
for c in s:
if c == '(':
depth += 1
max_depth = max(depth, max_depth)
else:
depth -= 1
return max_depth
return [parse_paren_group(x) for x in paren_string.split(' ') if x]
|
METADATA = {
'author': 'jt',
'dataset': 'test'
}
def check(candidate):
assert candidate('(()()) ((())) () ((())()())') == [2, 3, 1, 3]
assert candidate('() (()) ((())) (((())))') == [1, 2, 3, 4]
assert candidate('(()(())((())))') == [4]
|
parse_nested_parens
|
from typing import List
def parse_nested_parens(paren_string: str) -> List[int]:
""" Input to this function is a string represented multiple groups for nested parentheses separated by spaces.
For each of the group, output the deepest level of nesting of parentheses.
E.g. (()()) has maximum two levels of nesting while ((())) has three.
>>> parse_nested_parens('(()()) ((())) () ((())()())')
[2, 3, 1, 3]
"""
def parse_paren_group(s):
depth = 0
max_depth = 0
for c in s:
if c == '(':
depth += 1
max_depth = max(depth, max_depth)
else:
depth -= 1
return max_depth
return [parse_paren_group(x) for x in paren_string.split(' ') if x]
|
HumanEval/60
|
def sum_to_n(n: int):
"""sum_to_n is a function that sums numbers from 1 to n.
>>> sum_to_n(30)
465
>>> sum_to_n(100)
5050
>>> sum_to_n(5)
15
>>> sum_to_n(10)
55
>>> sum_to_n(1)
1
"""
|
return sum(range(n + 1))
|
METADATA = {}
def check(candidate):
assert candidate(1) == 1
assert candidate(6) == 21
assert candidate(11) == 66
assert candidate(30) == 465
assert candidate(100) == 5050
|
sum_to_n
|
def sum_to_n(n: int):
"""sum_to_n is a function that sums numbers from 1 to n.
>>> sum_to_n(30)
465
>>> sum_to_n(100)
5050
>>> sum_to_n(5)
15
>>> sum_to_n(10)
55
>>> sum_to_n(1)
1
"""
return sum(range(n + 1))
|
HumanEval/61
|
def correct_bracketing(brackets: str):
""" brackets is a string of "(" and ")".
return True if every opening bracket has a corresponding closing bracket.
>>> correct_bracketing("(")
False
>>> correct_bracketing("()")
True
>>> correct_bracketing("(()())")
True
>>> correct_bracketing(")(()")
False
"""
|
depth = 0
for b in brackets:
if b == "(":
depth += 1
else:
depth -= 1
if depth < 0:
return False
return depth == 0
|
METADATA = {}
def check(candidate):
assert candidate("()")
assert candidate("(()())")
assert candidate("()()(()())()")
assert candidate("()()((()()())())(()()(()))")
assert not candidate("((()())))")
assert not candidate(")(()")
assert not candidate("(")
assert not candidate("((((")
assert not candidate(")")
assert not candidate("(()")
assert not candidate("()()(()())())(()")
assert not candidate("()()(()())()))()")
|
correct_bracketing
|
def correct_bracketing(brackets: str):
""" brackets is a string of "(" and ")".
return True if every opening bracket has a corresponding closing bracket.
>>> correct_bracketing("(")
False
>>> correct_bracketing("()")
True
>>> correct_bracketing("(()())")
True
>>> correct_bracketing(")(()")
False
"""
depth = 0
for b in brackets:
if b == "(":
depth += 1
else:
depth -= 1
if depth < 0:
return False
return depth == 0
|
HumanEval/62
|
def derivative(xs: list):
""" xs represent coefficients of a polynomial.
xs[0] + xs[1] * x + xs[2] * x^2 + ....
Return derivative of this polynomial in the same form.
>>> derivative([3, 1, 2, 4, 5])
[1, 4, 12, 20]
>>> derivative([1, 2, 3])
[2, 6]
"""
|
return [(i * x) for i, x in enumerate(xs)][1:]
|
METADATA = {}
def check(candidate):
assert candidate([3, 1, 2, 4, 5]) == [1, 4, 12, 20]
assert candidate([1, 2, 3]) == [2, 6]
assert candidate([3, 2, 1]) == [2, 2]
assert candidate([3, 2, 1, 0, 4]) == [2, 2, 0, 16]
assert candidate([1]) == []
|
derivative
|
def derivative(xs: list):
""" xs represent coefficients of a polynomial.
xs[0] + xs[1] * x + xs[2] * x^2 + ....
Return derivative of this polynomial in the same form.
>>> derivative([3, 1, 2, 4, 5])
[1, 4, 12, 20]
>>> derivative([1, 2, 3])
[2, 6]
"""
return [(i * x) for i, x in enumerate(xs)][1:]
|
HumanEval/63
|
def fibfib(n: int):
"""The FibFib number sequence is a sequence similar to the Fibbonacci sequnece that's defined as follows:
fibfib(0) == 0
fibfib(1) == 0
fibfib(2) == 1
fibfib(n) == fibfib(n-1) + fibfib(n-2) + fibfib(n-3).
Please write a function to efficiently compute the n-th element of the fibfib number sequence.
>>> fibfib(1)
0
>>> fibfib(5)
4
>>> fibfib(8)
24
"""
|
if n == 0:
return 0
if n == 1:
return 0
if n == 2:
return 1
return fibfib(n - 1) + fibfib(n - 2) + fibfib(n - 3)
|
METADATA = {}
def check(candidate):
assert candidate(2) == 1
assert candidate(1) == 0
assert candidate(5) == 4
assert candidate(8) == 24
assert candidate(10) == 81
assert candidate(12) == 274
assert candidate(14) == 927
|
fibfib
|
def fibfib(n: int):
"""The FibFib number sequence is a sequence similar to the Fibbonacci sequnece that's defined as follows:
fibfib(0) == 0
fibfib(1) == 0
fibfib(2) == 1
fibfib(n) == fibfib(n-1) + fibfib(n-2) + fibfib(n-3).
Please write a function to efficiently compute the n-th element of the fibfib number sequence.
>>> fibfib(1)
0
>>> fibfib(5)
4
>>> fibfib(8)
24
"""
if n == 0:
return 0
if n == 1:
return 0
if n == 2:
return 1
return fibfib(n - 1) + fibfib(n - 2) + fibfib(n - 3)
|
HumanEval/64
|
FIX = """
Add more test cases.
"""
def vowels_count(s):
"""Write a function vowels_count which takes a string representing
a word as input and returns the number of vowels in the string.
Vowels in this case are 'a', 'e', 'i', 'o', 'u'. Here, 'y' is also a
vowel, but only when it is at the end of the given word.
Example:
>>> vowels_count("abcde")
2
>>> vowels_count("ACEDY")
3
"""
|
vowels = "aeiouAEIOU"
n_vowels = sum(c in vowels for c in s)
if s[-1] == 'y' or s[-1] == 'Y':
n_vowels += 1
return n_vowels
|
def check(candidate):
# Check some simple cases
assert candidate("abcde") == 2, "Test 1"
assert candidate("Alone") == 3, "Test 2"
assert candidate("key") == 2, "Test 3"
assert candidate("bye") == 1, "Test 4"
assert candidate("keY") == 2, "Test 5"
assert candidate("bYe") == 1, "Test 6"
assert candidate("ACEDY") == 3, "Test 7"
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
|
vowels_count
|
FIX = """
Add more test cases.
"""
def vowels_count(s):
"""Write a function vowels_count which takes a string representing
a word as input and returns the number of vowels in the string.
Vowels in this case are 'a', 'e', 'i', 'o', 'u'. Here, 'y' is also a
vowel, but only when it is at the end of the given word.
Example:
>>> vowels_count("abcde")
2
>>> vowels_count("ACEDY")
3
"""
vowels = "aeiouAEIOU"
n_vowels = sum(c in vowels for c in s)
if s[-1] == 'y' or s[-1] == 'Y':
n_vowels += 1
return n_vowels
|
HumanEval/65
|
def circular_shift(x, shift):
"""Circular shift the digits of the integer x, shift the digits right by shift
and return the result as a string.
If shift > number of digits, return digits reversed.
>>> circular_shift(12, 1)
"21"
>>> circular_shift(12, 2)
"12"
"""
|
s = str(x)
if shift > len(s):
return s[::-1]
else:
return s[len(s) - shift:] + s[:len(s) - shift]
|
def check(candidate):
# Check some simple cases
assert candidate(100, 2) == "001"
assert candidate(12, 2) == "12"
assert candidate(97, 8) == "79"
assert candidate(12, 1) == "21", "This prints if this assert fails 1 (good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate(11, 101) == "11", "This prints if this assert fails 2 (also good for debugging!)"
|
circular_shift
|
def circular_shift(x, shift):
"""Circular shift the digits of the integer x, shift the digits right by shift
and return the result as a string.
If shift > number of digits, return digits reversed.
>>> circular_shift(12, 1)
"21"
>>> circular_shift(12, 2)
"12"
"""
s = str(x)
if shift > len(s):
return s[::-1]
else:
return s[len(s) - shift:] + s[:len(s) - shift]
|
HumanEval/66
|
def digitSum(s):
"""Task
Write a function that takes a string as input and returns the sum of the upper characters only'
ASCII codes.
Examples:
digitSum("") => 0
digitSum("abAB") => 131
digitSum("abcCd") => 67
digitSum("helloE") => 69
digitSum("woArBld") => 131
digitSum("aAaaaXa") => 153
"""
|
if s == "": return 0
return sum(ord(char) if char.isupper() else 0 for char in s)
|
def check(candidate):
# Check some simple cases
assert True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate("") == 0, "Error"
assert candidate("abAB") == 131, "Error"
assert candidate("abcCd") == 67, "Error"
assert candidate("helloE") == 69, "Error"
assert candidate("woArBld") == 131, "Error"
assert candidate("aAaaaXa") == 153, "Error"
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
assert candidate(" How are yOu?") == 151, "Error"
assert candidate("You arE Very Smart") == 327, "Error"
|
digitSum
|
def digitSum(s):
"""Task
Write a function that takes a string as input and returns the sum of the upper characters only'
ASCII codes.
Examples:
digitSum("") => 0
digitSum("abAB") => 131
digitSum("abcCd") => 67
digitSum("helloE") => 69
digitSum("woArBld") => 131
digitSum("aAaaaXa") => 153
"""
if s == "": return 0
return sum(ord(char) if char.isupper() else 0 for char in s)
|
HumanEval/67
|
def fruit_distribution(s,n):
"""
In this task, you will be given a string that represents a number of apples and oranges
that are distributed in a basket of fruit this basket contains
apples, oranges, and mango fruits. Given the string that represents the total number of
the oranges and apples and an integer that represent the total number of the fruits
in the basket return the number of the mango fruits in the basket.
for examble:
fruit_distribution("5 apples and 6 oranges", 19) ->19 - 5 - 6 = 8
fruit_distribution("0 apples and 1 oranges",3) -> 3 - 0 - 1 = 2
fruit_distribution("2 apples and 3 oranges", 100) -> 100 - 2 - 3 = 95
fruit_distribution("100 apples and 1 oranges",120) -> 120 - 100 - 1 = 19
"""
|
lis = list()
for i in s.split(' '):
if i.isdigit():
lis.append(int(i))
return n - sum(lis)
|
def check(candidate):
# Check some simple cases
assert candidate("5 apples and 6 oranges",19) == 8
assert candidate("5 apples and 6 oranges",21) == 10
assert candidate("0 apples and 1 oranges",3) == 2
assert candidate("1 apples and 0 oranges",3) == 2
assert candidate("2 apples and 3 oranges",100) == 95
assert candidate("2 apples and 3 oranges",5) == 0
assert candidate("1 apples and 100 oranges",120) == 19
|
fruit_distribution
|
def fruit_distribution(s,n):
"""
In this task, you will be given a string that represents a number of apples and oranges
that are distributed in a basket of fruit this basket contains
apples, oranges, and mango fruits. Given the string that represents the total number of
the oranges and apples and an integer that represent the total number of the fruits
in the basket return the number of the mango fruits in the basket.
for examble:
fruit_distribution("5 apples and 6 oranges", 19) ->19 - 5 - 6 = 8
fruit_distribution("0 apples and 1 oranges",3) -> 3 - 0 - 1 = 2
fruit_distribution("2 apples and 3 oranges", 100) -> 100 - 2 - 3 = 95
fruit_distribution("100 apples and 1 oranges",120) -> 120 - 100 - 1 = 19
"""
lis = list()
for i in s.split(' '):
if i.isdigit():
lis.append(int(i))
return n - sum(lis)
|
HumanEval/68
|
def pluck(arr):
"""
"Given an array representing a branch of a tree that has non-negative integer nodes
your task is to pluck one of the nodes and return it.
The plucked node should be the node with the smallest even value.
If multiple nodes with the same smallest even value are found return the node that has smallest index.
The plucked node should be returned in a list, [ smalest_value, its index ],
If there are no even values or the given array is empty, return [].
Example 1:
Input: [4,2,3]
Output: [2, 1]
Explanation: 2 has the smallest even value, and 2 has the smallest index.
Example 2:
Input: [1,2,3]
Output: [2, 1]
Explanation: 2 has the smallest even value, and 2 has the smallest index.
Example 3:
Input: []
Output: []
Example 4:
Input: [5, 0, 3, 0, 4, 2]
Output: [0, 1]
Explanation: 0 is the smallest value, but there are two zeros,
so we will choose the first zero, which has the smallest index.
Constraints:
* 1 <= nodes.length <= 10000
* 0 <= node.value
"""
|
if(len(arr) == 0): return []
evens = list(filter(lambda x: x%2 == 0, arr))
if(evens == []): return []
return [min(evens), arr.index(min(evens))]
|
def check(candidate):
# Check some simple cases
assert True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate([4,2,3]) == [2, 1], "Error"
assert candidate([1,2,3]) == [2, 1], "Error"
assert candidate([]) == [], "Error"
assert candidate([5, 0, 3, 0, 4, 2]) == [0, 1], "Error"
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
assert candidate([1, 2, 3, 0, 5, 3]) == [0, 3], "Error"
assert candidate([5, 4, 8, 4 ,8]) == [4, 1], "Error"
assert candidate([7, 6, 7, 1]) == [6, 1], "Error"
assert candidate([7, 9, 7, 1]) == [], "Error"
|
pluck
|
def pluck(arr):
"""
"Given an array representing a branch of a tree that has non-negative integer nodes
your task is to pluck one of the nodes and return it.
The plucked node should be the node with the smallest even value.
If multiple nodes with the same smallest even value are found return the node that has smallest index.
The plucked node should be returned in a list, [ smalest_value, its index ],
If there are no even values or the given array is empty, return [].
Example 1:
Input: [4,2,3]
Output: [2, 1]
Explanation: 2 has the smallest even value, and 2 has the smallest index.
Example 2:
Input: [1,2,3]
Output: [2, 1]
Explanation: 2 has the smallest even value, and 2 has the smallest index.
Example 3:
Input: []
Output: []
Example 4:
Input: [5, 0, 3, 0, 4, 2]
Output: [0, 1]
Explanation: 0 is the smallest value, but there are two zeros,
so we will choose the first zero, which has the smallest index.
Constraints:
* 1 <= nodes.length <= 10000
* 0 <= node.value
"""
if(len(arr) == 0): return []
evens = list(filter(lambda x: x%2 == 0, arr))
if(evens == []): return []
return [min(evens), arr.index(min(evens))]
|
HumanEval/69
|
def search(lst):
'''
You are given a non-empty list of positive integers. Return the greatest integer that is greater than
zero, and has a frequency greater than or equal to the value of the integer itself.
The frequency of an integer is the number of times it appears in the list.
If no such a value exist, return -1.
Examples:
search([4, 1, 2, 2, 3, 1]) == 2
search([1, 2, 2, 3, 3, 3, 4, 4, 4]) == 3
search([5, 5, 4, 4, 4]) == -1
'''
|
frq = [0] * (max(lst) + 1)
for i in lst:
frq[i] += 1;
ans = -1
for i in range(1, len(frq)):
if frq[i] >= i:
ans = i
return ans
|
def check(candidate):
# manually generated tests
assert candidate([5, 5, 5, 5, 1]) == 1
assert candidate([4, 1, 4, 1, 4, 4]) == 4
assert candidate([3, 3]) == -1
assert candidate([8, 8, 8, 8, 8, 8, 8, 8]) == 8
assert candidate([2, 3, 3, 2, 2]) == 2
# automatically generated tests
assert candidate([2, 7, 8, 8, 4, 8, 7, 3, 9, 6, 5, 10, 4, 3, 6, 7, 1, 7, 4, 10, 8, 1]) == 1
assert candidate([3, 2, 8, 2]) == 2
assert candidate([6, 7, 1, 8, 8, 10, 5, 8, 5, 3, 10]) == 1
assert candidate([8, 8, 3, 6, 5, 6, 4]) == -1
assert candidate([6, 9, 6, 7, 1, 4, 7, 1, 8, 8, 9, 8, 10, 10, 8, 4, 10, 4, 10, 1, 2, 9, 5, 7, 9]) == 1
assert candidate([1, 9, 10, 1, 3]) == 1
assert candidate([6, 9, 7, 5, 8, 7, 5, 3, 7, 5, 10, 10, 3, 6, 10, 2, 8, 6, 5, 4, 9, 5, 3, 10]) == 5
assert candidate([1]) == 1
assert candidate([8, 8, 10, 6, 4, 3, 5, 8, 2, 4, 2, 8, 4, 6, 10, 4, 2, 1, 10, 2, 1, 1, 5]) == 4
assert candidate([2, 10, 4, 8, 2, 10, 5, 1, 2, 9, 5, 5, 6, 3, 8, 6, 4, 10]) == 2
assert candidate([1, 6, 10, 1, 6, 9, 10, 8, 6, 8, 7, 3]) == 1
assert candidate([9, 2, 4, 1, 5, 1, 5, 2, 5, 7, 7, 7, 3, 10, 1, 5, 4, 2, 8, 4, 1, 9, 10, 7, 10, 2, 8, 10, 9, 4]) == 4
assert candidate([2, 6, 4, 2, 8, 7, 5, 6, 4, 10, 4, 6, 3, 7, 8, 8, 3, 1, 4, 2, 2, 10, 7]) == 4
assert candidate([9, 8, 6, 10, 2, 6, 10, 2, 7, 8, 10, 3, 8, 2, 6, 2, 3, 1]) == 2
assert candidate([5, 5, 3, 9, 5, 6, 3, 2, 8, 5, 6, 10, 10, 6, 8, 4, 10, 7, 7, 10, 8]) == -1
assert candidate([10]) == -1
assert candidate([9, 7, 7, 2, 4, 7, 2, 10, 9, 7, 5, 7, 2]) == 2
assert candidate([5, 4, 10, 2, 1, 1, 10, 3, 6, 1, 8]) == 1
assert candidate([7, 9, 9, 9, 3, 4, 1, 5, 9, 1, 2, 1, 1, 10, 7, 5, 6, 7, 6, 7, 7, 6]) == 1
assert candidate([3, 10, 10, 9, 2]) == -1
|
search
|
def search(lst):
'''
You are given a non-empty list of positive integers. Return the greatest integer that is greater than
zero, and has a frequency greater than or equal to the value of the integer itself.
The frequency of an integer is the number of times it appears in the list.
If no such a value exist, return -1.
Examples:
search([4, 1, 2, 2, 3, 1]) == 2
search([1, 2, 2, 3, 3, 3, 4, 4, 4]) == 3
search([5, 5, 4, 4, 4]) == -1
'''
frq = [0] * (max(lst) + 1)
for i in lst:
frq[i] += 1;
ans = -1
for i in range(1, len(frq)):
if frq[i] >= i:
ans = i
return ans
|
HumanEval/7
|
from typing import List
def filter_by_substring(strings: List[str], substring: str) -> List[str]:
""" Filter an input list of strings only for ones that contain given substring
>>> filter_by_substring([], 'a')
[]
>>> filter_by_substring(['abc', 'bacd', 'cde', 'array'], 'a')
['abc', 'bacd', 'array']
"""
|
return [x for x in strings if substring in x]
|
METADATA = {
'author': 'jt',
'dataset': 'test'
}
def check(candidate):
assert candidate([], 'john') == []
assert candidate(['xxx', 'asd', 'xxy', 'john doe', 'xxxAAA', 'xxx'], 'xxx') == ['xxx', 'xxxAAA', 'xxx']
assert candidate(['xxx', 'asd', 'aaaxxy', 'john doe', 'xxxAAA', 'xxx'], 'xx') == ['xxx', 'aaaxxy', 'xxxAAA', 'xxx']
assert candidate(['grunt', 'trumpet', 'prune', 'gruesome'], 'run') == ['grunt', 'prune']
|
filter_by_substring
|
from typing import List
def filter_by_substring(strings: List[str], substring: str) -> List[str]:
""" Filter an input list of strings only for ones that contain given substring
>>> filter_by_substring([], 'a')
[]
>>> filter_by_substring(['abc', 'bacd', 'cde', 'array'], 'a')
['abc', 'bacd', 'array']
"""
return [x for x in strings if substring in x]
|
HumanEval/70
|
def strange_sort_list(lst):
'''
Given list of integers, return list in strange order.
Strange sorting, is when you start with the minimum value,
then maximum of the remaining integers, then minimum and so on.
Examples:
strange_sort_list([1, 2, 3, 4]) == [1, 4, 2, 3]
strange_sort_list([5, 5, 5, 5]) == [5, 5, 5, 5]
strange_sort_list([]) == []
'''
|
res, switch = [], True
while lst:
res.append(min(lst) if switch else max(lst))
lst.remove(res[-1])
switch = not switch
return res
|
def check(candidate):
# Check some simple cases
assert candidate([1, 2, 3, 4]) == [1, 4, 2, 3]
assert candidate([5, 6, 7, 8, 9]) == [5, 9, 6, 8, 7]
assert candidate([1, 2, 3, 4, 5]) == [1, 5, 2, 4, 3]
assert candidate([5, 6, 7, 8, 9, 1]) == [1, 9, 5, 8, 6, 7]
assert candidate([5, 5, 5, 5]) == [5, 5, 5, 5]
assert candidate([]) == []
assert candidate([1,2,3,4,5,6,7,8]) == [1, 8, 2, 7, 3, 6, 4, 5]
assert candidate([0,2,2,2,5,5,-5,-5]) == [-5, 5, -5, 5, 0, 2, 2, 2]
assert candidate([111111]) == [111111]
# Check some edge cases that are easy to work out by hand.
assert True
|
strange_sort_list
|
def strange_sort_list(lst):
'''
Given list of integers, return list in strange order.
Strange sorting, is when you start with the minimum value,
then maximum of the remaining integers, then minimum and so on.
Examples:
strange_sort_list([1, 2, 3, 4]) == [1, 4, 2, 3]
strange_sort_list([5, 5, 5, 5]) == [5, 5, 5, 5]
strange_sort_list([]) == []
'''
res, switch = [], True
while lst:
res.append(min(lst) if switch else max(lst))
lst.remove(res[-1])
switch = not switch
return res
|
HumanEval/71
|
def triangle_area(a, b, c):
'''
Given the lengths of the three sides of a triangle. Return the area of
the triangle rounded to 2 decimal points if the three sides form a valid triangle.
Otherwise return -1
Three sides make a valid triangle when the sum of any two sides is greater
than the third side.
Example:
triangle_area(3, 4, 5) == 6.00
triangle_area(1, 2, 10) == -1
'''
|
if a + b <= c or a + c <= b or b + c <= a:
return -1
s = (a + b + c)/2
area = (s * (s - a) * (s - b) * (s - c)) ** 0.5
area = round(area, 2)
return area
|
def check(candidate):
# Check some simple cases
assert candidate(3, 4, 5) == 6.00, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(1, 2, 10) == -1
assert candidate(4, 8, 5) == 8.18
assert candidate(2, 2, 2) == 1.73
assert candidate(1, 2, 3) == -1
assert candidate(10, 5, 7) == 16.25
assert candidate(2, 6, 3) == -1
# Check some edge cases that are easy to work out by hand.
assert candidate(1, 1, 1) == 0.43, "This prints if this assert fails 2 (also good for debugging!)"
assert candidate(2, 2, 10) == -1
|
triangle_area
|
def triangle_area(a, b, c):
'''
Given the lengths of the three sides of a triangle. Return the area of
the triangle rounded to 2 decimal points if the three sides form a valid triangle.
Otherwise return -1
Three sides make a valid triangle when the sum of any two sides is greater
than the third side.
Example:
triangle_area(3, 4, 5) == 6.00
triangle_area(1, 2, 10) == -1
'''
if a + b <= c or a + c <= b or b + c <= a:
return -1
s = (a + b + c)/2
area = (s * (s - a) * (s - b) * (s - c)) ** 0.5
area = round(area, 2)
return area
|
HumanEval/72
|
def will_it_fly(q,w):
'''
Write a function that returns True if the object q will fly, and False otherwise.
The object q will fly if it's balanced (it is a palindromic list) and the sum of its elements is less than or equal the maximum possible weight w.
Example:
will_it_fly([1, 2], 5) ➞ False
# 1+2 is less than the maximum possible weight, but it's unbalanced.
will_it_fly([3, 2, 3], 1) ➞ False
# it's balanced, but 3+2+3 is more than the maximum possible weight.
will_it_fly([3, 2, 3], 9) ➞ True
# 3+2+3 is less than the maximum possible weight, and it's balanced.
will_it_fly([3], 5) ➞ True
# 3 is less than the maximum possible weight, and it's balanced.
'''
|
if sum(q) > w:
return False
i, j = 0, len(q)-1
while i<j:
if q[i] != q[j]:
return False
i+=1
j-=1
return True
|
def check(candidate):
# Check some simple cases
assert candidate([3, 2, 3], 9) is True
assert candidate([1, 2], 5) is False
assert candidate([3], 5) is True
assert candidate([3, 2, 3], 1) is False
# Check some edge cases that are easy to work out by hand.
assert candidate([1, 2, 3], 6) is False
assert candidate([5], 5) is True
|
will_it_fly
|
def will_it_fly(q,w):
'''
Write a function that returns True if the object q will fly, and False otherwise.
The object q will fly if it's balanced (it is a palindromic list) and the sum of its elements is less than or equal the maximum possible weight w.
Example:
will_it_fly([1, 2], 5) ➞ False
# 1+2 is less than the maximum possible weight, but it's unbalanced.
will_it_fly([3, 2, 3], 1) ➞ False
# it's balanced, but 3+2+3 is more than the maximum possible weight.
will_it_fly([3, 2, 3], 9) ➞ True
# 3+2+3 is less than the maximum possible weight, and it's balanced.
will_it_fly([3], 5) ➞ True
# 3 is less than the maximum possible weight, and it's balanced.
'''
if sum(q) > w:
return False
i, j = 0, len(q)-1
while i<j:
if q[i] != q[j]:
return False
i+=1
j-=1
return True
|
HumanEval/73
|
def smallest_change(arr):
"""
Given an array arr of integers, find the minimum number of elements that
need to be changed to make the array palindromic. A palindromic array is an array that
is read the same backwards and forwards. In one change, you can change one element to any other element.
For example:
smallest_change([1,2,3,5,4,7,9,6]) == 4
smallest_change([1, 2, 3, 4, 3, 2, 2]) == 1
smallest_change([1, 2, 3, 2, 1]) == 0
"""
|
ans = 0
for i in range(len(arr) // 2):
if arr[i] != arr[len(arr) - i - 1]:
ans += 1
return ans
|
def check(candidate):
# Check some simple cases
assert candidate([1,2,3,5,4,7,9,6]) == 4
assert candidate([1, 2, 3, 4, 3, 2, 2]) == 1
assert candidate([1, 4, 2]) == 1
assert candidate([1, 4, 4, 2]) == 1
# Check some edge cases that are easy to work out by hand.
assert candidate([1, 2, 3, 2, 1]) == 0
assert candidate([3, 1, 1, 3]) == 0
assert candidate([1]) == 0
assert candidate([0, 1]) == 1
|
smallest_change
|
def smallest_change(arr):
"""
Given an array arr of integers, find the minimum number of elements that
need to be changed to make the array palindromic. A palindromic array is an array that
is read the same backwards and forwards. In one change, you can change one element to any other element.
For example:
smallest_change([1,2,3,5,4,7,9,6]) == 4
smallest_change([1, 2, 3, 4, 3, 2, 2]) == 1
smallest_change([1, 2, 3, 2, 1]) == 0
"""
ans = 0
for i in range(len(arr) // 2):
if arr[i] != arr[len(arr) - i - 1]:
ans += 1
return ans
|
HumanEval/74
|
def total_match(lst1, lst2):
'''
Write a function that accepts two lists of strings and returns the list that has
total number of chars in the all strings of the list less than the other list.
if the two lists have the same number of chars, return the first list.
Examples
total_match([], []) ➞ []
total_match(['hi', 'admin'], ['hI', 'Hi']) ➞ ['hI', 'Hi']
total_match(['hi', 'admin'], ['hi', 'hi', 'admin', 'project']) ➞ ['hi', 'admin']
total_match(['hi', 'admin'], ['hI', 'hi', 'hi']) ➞ ['hI', 'hi', 'hi']
total_match(['4'], ['1', '2', '3', '4', '5']) ➞ ['4']
'''
|
l1 = 0
for st in lst1:
l1 += len(st)
l2 = 0
for st in lst2:
l2 += len(st)
if l1 <= l2:
return lst1
else:
return lst2
|
def check(candidate):
# Check some simple cases
assert True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate([], []) == []
assert candidate(['hi', 'admin'], ['hi', 'hi']) == ['hi', 'hi']
assert candidate(['hi', 'admin'], ['hi', 'hi', 'admin', 'project']) == ['hi', 'admin']
assert candidate(['4'], ['1', '2', '3', '4', '5']) == ['4']
assert candidate(['hi', 'admin'], ['hI', 'Hi']) == ['hI', 'Hi']
assert candidate(['hi', 'admin'], ['hI', 'hi', 'hi']) == ['hI', 'hi', 'hi']
assert candidate(['hi', 'admin'], ['hI', 'hi', 'hii']) == ['hi', 'admin']
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
assert candidate([], ['this']) == []
assert candidate(['this'], []) == []
|
total_match
|
def total_match(lst1, lst2):
'''
Write a function that accepts two lists of strings and returns the list that has
total number of chars in the all strings of the list less than the other list.
if the two lists have the same number of chars, return the first list.
Examples
total_match([], []) ➞ []
total_match(['hi', 'admin'], ['hI', 'Hi']) ➞ ['hI', 'Hi']
total_match(['hi', 'admin'], ['hi', 'hi', 'admin', 'project']) ➞ ['hi', 'admin']
total_match(['hi', 'admin'], ['hI', 'hi', 'hi']) ➞ ['hI', 'hi', 'hi']
total_match(['4'], ['1', '2', '3', '4', '5']) ➞ ['4']
'''
l1 = 0
for st in lst1:
l1 += len(st)
l2 = 0
for st in lst2:
l2 += len(st)
if l1 <= l2:
return lst1
else:
return lst2
|
HumanEval/75
|
def is_multiply_prime(a):
"""Write a function that returns true if the given number is the multiplication of 3 prime numbers
and false otherwise.
Knowing that (a) is less then 100.
Example:
is_multiply_prime(30) == True
30 = 2 * 3 * 5
"""
|
def is_prime(n):
for j in range(2,n):
if n%j == 0:
return False
return True
for i in range(2,101):
if not is_prime(i): continue
for j in range(2,101):
if not is_prime(j): continue
for k in range(2,101):
if not is_prime(k): continue
if i*j*k == a: return True
return False
|
def check(candidate):
assert candidate(5) == False
assert candidate(30) == True
assert candidate(8) == True
assert candidate(10) == False
assert candidate(125) == True
assert candidate(3 * 5 * 7) == True
assert candidate(3 * 6 * 7) == False
assert candidate(9 * 9 * 9) == False
assert candidate(11 * 9 * 9) == False
assert candidate(11 * 13 * 7) == True
|
is_multiply_prime
|
def is_multiply_prime(a):
"""Write a function that returns true if the given number is the multiplication of 3 prime numbers
and false otherwise.
Knowing that (a) is less then 100.
Example:
is_multiply_prime(30) == True
30 = 2 * 3 * 5
"""
def is_prime(n):
for j in range(2,n):
if n%j == 0:
return False
return True
for i in range(2,101):
if not is_prime(i): continue
for j in range(2,101):
if not is_prime(j): continue
for k in range(2,101):
if not is_prime(k): continue
if i*j*k == a: return True
return False
|
HumanEval/76
|
def is_simple_power(x, n):
"""Your task is to write a function that returns true if a number x is a simple
power of n and false in other cases.
x is a simple power of n if n**int=x
For example:
is_simple_power(1, 4) => true
is_simple_power(2, 2) => true
is_simple_power(8, 2) => true
is_simple_power(3, 2) => false
is_simple_power(3, 1) => false
is_simple_power(5, 3) => false
"""
|
if (n == 1):
return (x == 1)
power = 1
while (power < x):
power = power * n
return (power == x)
|
def check(candidate):
# Check some simple cases
assert candidate(16, 2)== True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(143214, 16)== False, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(4, 2)==True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(9, 3)==True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(16, 4)==True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(24, 2)==False, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(128, 4)==False, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(12, 6)==False, "This prints if this assert fails 1 (good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate(1, 1)==True, "This prints if this assert fails 2 (also good for debugging!)"
assert candidate(1, 12)==True, "This prints if this assert fails 2 (also good for debugging!)"
|
is_simple_power
|
def is_simple_power(x, n):
"""Your task is to write a function that returns true if a number x is a simple
power of n and false in other cases.
x is a simple power of n if n**int=x
For example:
is_simple_power(1, 4) => true
is_simple_power(2, 2) => true
is_simple_power(8, 2) => true
is_simple_power(3, 2) => false
is_simple_power(3, 1) => false
is_simple_power(5, 3) => false
"""
if (n == 1):
return (x == 1)
power = 1
while (power < x):
power = power * n
return (power == x)
|
HumanEval/77
|
def iscube(a):
'''
Write a function that takes an integer a and returns True
if this ingeger is a cube of some integer number.
Note: you may assume the input is always valid.
Examples:
iscube(1) ==> True
iscube(2) ==> False
iscube(-1) ==> True
iscube(64) ==> True
iscube(0) ==> True
iscube(180) ==> False
'''
|
a = abs(a)
return int(round(a ** (1. / 3))) ** 3 == a
|
def check(candidate):
# Check some simple cases
assert candidate(1) == True, "First test error: " + str(candidate(1))
assert candidate(2) == False, "Second test error: " + str(candidate(2))
assert candidate(-1) == True, "Third test error: " + str(candidate(-1))
assert candidate(64) == True, "Fourth test error: " + str(candidate(64))
assert candidate(180) == False, "Fifth test error: " + str(candidate(180))
assert candidate(1000) == True, "Sixth test error: " + str(candidate(1000))
# Check some edge cases that are easy to work out by hand.
assert candidate(0) == True, "1st edge test error: " + str(candidate(0))
assert candidate(1729) == False, "2nd edge test error: " + str(candidate(1728))
|
iscube
|
def iscube(a):
'''
Write a function that takes an integer a and returns True
if this ingeger is a cube of some integer number.
Note: you may assume the input is always valid.
Examples:
iscube(1) ==> True
iscube(2) ==> False
iscube(-1) ==> True
iscube(64) ==> True
iscube(0) ==> True
iscube(180) ==> False
'''
a = abs(a)
return int(round(a ** (1. / 3))) ** 3 == a
|
HumanEval/78
|
def hex_key(num):
"""You have been tasked to write a function that receives
a hexadecimal number as a string and counts the number of hexadecimal
digits that are primes (prime number, or a prime, is a natural number
greater than 1 that is not a product of two smaller natural numbers).
Hexadecimal digits are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.
Prime numbers are 2, 3, 5, 7, 11, 13, 17,...
So you have to determine a number of the following digits: 2, 3, 5, 7,
B (=decimal 11), D (=decimal 13).
Note: you may assume the input is always correct or empty string,
and symbols A,B,C,D,E,F are always uppercase.
Examples:
For num = "AB" the output should be 1.
For num = "1077E" the output should be 2.
For num = "ABED1A33" the output should be 4.
For num = "123456789ABCDEF0" the output should be 6.
For num = "2020" the output should be 2.
"""
|
primes = ('2', '3', '5', '7', 'B', 'D')
total = 0
for i in range(0, len(num)):
if num[i] in primes:
total += 1
return total
|
def check(candidate):
# Check some simple cases
assert candidate("AB") == 1, "First test error: " + str(candidate("AB"))
assert candidate("1077E") == 2, "Second test error: " + str(candidate("1077E"))
assert candidate("ABED1A33") == 4, "Third test error: " + str(candidate("ABED1A33"))
assert candidate("2020") == 2, "Fourth test error: " + str(candidate("2020"))
assert candidate("123456789ABCDEF0") == 6, "Fifth test error: " + str(candidate("123456789ABCDEF0"))
assert candidate("112233445566778899AABBCCDDEEFF00") == 12, "Sixth test error: " + str(candidate("112233445566778899AABBCCDDEEFF00"))
# Check some edge cases that are easy to work out by hand.
assert candidate([]) == 0
|
hex_key
|
def hex_key(num):
"""You have been tasked to write a function that receives
a hexadecimal number as a string and counts the number of hexadecimal
digits that are primes (prime number, or a prime, is a natural number
greater than 1 that is not a product of two smaller natural numbers).
Hexadecimal digits are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.
Prime numbers are 2, 3, 5, 7, 11, 13, 17,...
So you have to determine a number of the following digits: 2, 3, 5, 7,
B (=decimal 11), D (=decimal 13).
Note: you may assume the input is always correct or empty string,
and symbols A,B,C,D,E,F are always uppercase.
Examples:
For num = "AB" the output should be 1.
For num = "1077E" the output should be 2.
For num = "ABED1A33" the output should be 4.
For num = "123456789ABCDEF0" the output should be 6.
For num = "2020" the output should be 2.
"""
primes = ('2', '3', '5', '7', 'B', 'D')
total = 0
for i in range(0, len(num)):
if num[i] in primes:
total += 1
return total
|
HumanEval/79
|
def decimal_to_binary(decimal):
"""You will be given a number in decimal form and your task is to convert it to
binary format. The function should return a string, with each character representing a binary
number. Each character in the string will be '0' or '1'.
There will be an extra couple of characters 'db' at the beginning and at the end of the string.
The extra characters are there to help with the format.
Examples:
decimal_to_binary(15) # returns "db1111db"
decimal_to_binary(32) # returns "db100000db"
"""
|
return "db" + bin(decimal)[2:] + "db"
|
def check(candidate):
# Check some simple cases
assert candidate(0) == "db0db"
assert candidate(32) == "db100000db"
assert candidate(103) == "db1100111db"
assert candidate(15) == "db1111db", "This prints if this assert fails 1 (good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
|
decimal_to_binary
|
def decimal_to_binary(decimal):
"""You will be given a number in decimal form and your task is to convert it to
binary format. The function should return a string, with each character representing a binary
number. Each character in the string will be '0' or '1'.
There will be an extra couple of characters 'db' at the beginning and at the end of the string.
The extra characters are there to help with the format.
Examples:
decimal_to_binary(15) # returns "db1111db"
decimal_to_binary(32) # returns "db100000db"
"""
return "db" + bin(decimal)[2:] + "db"
|
HumanEval/8
|
from typing import List, Tuple
def sum_product(numbers: List[int]) -> Tuple[int, int]:
""" For a given list of integers, return a tuple consisting of a sum and a product of all the integers in a list.
Empty sum should be equal to 0 and empty product should be equal to 1.
>>> sum_product([])
(0, 1)
>>> sum_product([1, 2, 3, 4])
(10, 24)
"""
|
sum_value = 0
prod_value = 1
for n in numbers:
sum_value += n
prod_value *= n
return sum_value, prod_value
|
METADATA = {
'author': 'jt',
'dataset': 'test'
}
def check(candidate):
assert candidate([]) == (0, 1)
assert candidate([1, 1, 1]) == (3, 1)
assert candidate([100, 0]) == (100, 0)
assert candidate([3, 5, 7]) == (3 + 5 + 7, 3 * 5 * 7)
assert candidate([10]) == (10, 10)
|
sum_product
|
from typing import List, Tuple
def sum_product(numbers: List[int]) -> Tuple[int, int]:
""" For a given list of integers, return a tuple consisting of a sum and a product of all the integers in a list.
Empty sum should be equal to 0 and empty product should be equal to 1.
>>> sum_product([])
(0, 1)
>>> sum_product([1, 2, 3, 4])
(10, 24)
"""
sum_value = 0
prod_value = 1
for n in numbers:
sum_value += n
prod_value *= n
return sum_value, prod_value
|
HumanEval/80
|
def is_happy(s):
"""You are given a string s.
Your task is to check if the string is happy or not.
A string is happy if its length is at least 3 and every 3 consecutive letters are distinct
For example:
is_happy(a) => False
is_happy(aa) => False
is_happy(abcd) => True
is_happy(aabb) => False
is_happy(adb) => True
is_happy(xyy) => False
"""
|
if len(s) < 3:
return False
for i in range(len(s) - 2):
if s[i] == s[i+1] or s[i+1] == s[i+2] or s[i] == s[i+2]:
return False
return True
|
def check(candidate):
# Check some simple cases
assert candidate("a") == False , "a"
assert candidate("aa") == False , "aa"
assert candidate("abcd") == True , "abcd"
assert candidate("aabb") == False , "aabb"
assert candidate("adb") == True , "adb"
assert candidate("xyy") == False , "xyy"
assert candidate("iopaxpoi") == True , "iopaxpoi"
assert candidate("iopaxioi") == False , "iopaxioi"
|
is_happy
|
def is_happy(s):
"""You are given a string s.
Your task is to check if the string is happy or not.
A string is happy if its length is at least 3 and every 3 consecutive letters are distinct
For example:
is_happy(a) => False
is_happy(aa) => False
is_happy(abcd) => True
is_happy(aabb) => False
is_happy(adb) => True
is_happy(xyy) => False
"""
if len(s) < 3:
return False
for i in range(len(s) - 2):
if s[i] == s[i+1] or s[i+1] == s[i+2] or s[i] == s[i+2]:
return False
return True
|
HumanEval/81
|
def numerical_letter_grade(grades):
"""It is the last week of the semester and the teacher has to give the grades
to students. The teacher has been making her own algorithm for grading.
The only problem is, she has lost the code she used for grading.
She has given you a list of GPAs for some students and you have to write
a function that can output a list of letter grades using the following table:
GPA | Letter grade
4.0 A+
> 3.7 A
> 3.3 A-
> 3.0 B+
> 2.7 B
> 2.3 B-
> 2.0 C+
> 1.7 C
> 1.3 C-
> 1.0 D+
> 0.7 D
> 0.0 D-
0.0 E
Example:
grade_equation([4.0, 3, 1.7, 2, 3.5]) ==> ['A+', 'B', 'C-', 'C', 'A-']
"""
|
letter_grade = []
for gpa in grades:
if gpa == 4.0:
letter_grade.append("A+")
elif gpa > 3.7:
letter_grade.append("A")
elif gpa > 3.3:
letter_grade.append("A-")
elif gpa > 3.0:
letter_grade.append("B+")
elif gpa > 2.7:
letter_grade.append("B")
elif gpa > 2.3:
letter_grade.append("B-")
elif gpa > 2.0:
letter_grade.append("C+")
elif gpa > 1.7:
letter_grade.append("C")
elif gpa > 1.3:
letter_grade.append("C-")
elif gpa > 1.0:
letter_grade.append("D+")
elif gpa > 0.7:
letter_grade.append("D")
elif gpa > 0.0:
letter_grade.append("D-")
else:
letter_grade.append("E")
return letter_grade
|
def check(candidate):
# Check some simple cases
assert candidate([4.0, 3, 1.7, 2, 3.5]) == ['A+', 'B', 'C-', 'C', 'A-']
assert candidate([1.2]) == ['D+']
assert candidate([0.5]) == ['D-']
assert candidate([0.0]) == ['E']
assert candidate([1, 0.3, 1.5, 2.8, 3.3]) == ['D', 'D-', 'C-', 'B', 'B+']
assert candidate([0, 0.7]) == ['E', 'D-']
# Check some edge cases that are easy to work out by hand.
assert True
|
numerical_letter_grade
|
def numerical_letter_grade(grades):
"""It is the last week of the semester and the teacher has to give the grades
to students. The teacher has been making her own algorithm for grading.
The only problem is, she has lost the code she used for grading.
She has given you a list of GPAs for some students and you have to write
a function that can output a list of letter grades using the following table:
GPA | Letter grade
4.0 A+
> 3.7 A
> 3.3 A-
> 3.0 B+
> 2.7 B
> 2.3 B-
> 2.0 C+
> 1.7 C
> 1.3 C-
> 1.0 D+
> 0.7 D
> 0.0 D-
0.0 E
Example:
grade_equation([4.0, 3, 1.7, 2, 3.5]) ==> ['A+', 'B', 'C-', 'C', 'A-']
"""
letter_grade = []
for gpa in grades:
if gpa == 4.0:
letter_grade.append("A+")
elif gpa > 3.7:
letter_grade.append("A")
elif gpa > 3.3:
letter_grade.append("A-")
elif gpa > 3.0:
letter_grade.append("B+")
elif gpa > 2.7:
letter_grade.append("B")
elif gpa > 2.3:
letter_grade.append("B-")
elif gpa > 2.0:
letter_grade.append("C+")
elif gpa > 1.7:
letter_grade.append("C")
elif gpa > 1.3:
letter_grade.append("C-")
elif gpa > 1.0:
letter_grade.append("D+")
elif gpa > 0.7:
letter_grade.append("D")
elif gpa > 0.0:
letter_grade.append("D-")
else:
letter_grade.append("E")
return letter_grade
|
HumanEval/82
|
def prime_length(string):
"""Write a function that takes a string and returns True if the string
length is a prime number or False otherwise
Examples
prime_length('Hello') == True
prime_length('abcdcba') == True
prime_length('kittens') == True
prime_length('orange') == False
"""
|
l = len(string)
if l == 0 or l == 1:
return False
for i in range(2, l):
if l % i == 0:
return False
return True
|
def check(candidate):
# Check some simple cases
assert candidate('Hello') == True
assert candidate('abcdcba') == True
assert candidate('kittens') == True
assert candidate('orange') == False
assert candidate('wow') == True
assert candidate('world') == True
assert candidate('MadaM') == True
assert candidate('Wow') == True
assert candidate('') == False
assert candidate('HI') == True
assert candidate('go') == True
assert candidate('gogo') == False
assert candidate('aaaaaaaaaaaaaaa') == False
# Check some edge cases that are easy to work out by hand.
assert candidate('Madam') == True
assert candidate('M') == False
assert candidate('0') == False
|
prime_length
|
def prime_length(string):
"""Write a function that takes a string and returns True if the string
length is a prime number or False otherwise
Examples
prime_length('Hello') == True
prime_length('abcdcba') == True
prime_length('kittens') == True
prime_length('orange') == False
"""
l = len(string)
if l == 0 or l == 1:
return False
for i in range(2, l):
if l % i == 0:
return False
return True
|
HumanEval/83
|
def starts_one_ends(n):
"""
Given a positive integer n, return the count of the numbers of n-digit
positive integers that start or end with 1.
"""
|
if n == 1: return 1
return 18 * (10 ** (n - 2))
|
def check(candidate):
# Check some simple cases
assert True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(1) == 1
assert candidate(2) == 18
assert candidate(3) == 180
assert candidate(4) == 1800
assert candidate(5) == 18000
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
|
starts_one_ends
|
def starts_one_ends(n):
"""
Given a positive integer n, return the count of the numbers of n-digit
positive integers that start or end with 1.
"""
if n == 1: return 1
return 18 * (10 ** (n - 2))
|
HumanEval/84
|
def solve(N):
"""Given a positive integer N, return the total sum of its digits in binary.
Example
For N = 1000, the sum of digits will be 1 the output should be "1".
For N = 150, the sum of digits will be 6 the output should be "110".
For N = 147, the sum of digits will be 12 the output should be "1100".
Variables:
@N integer
Constraints: 0 ≤ N ≤ 10000.
Output:
a string of binary number
"""
|
return bin(sum(int(i) for i in str(N)))[2:]
|
def check(candidate):
# Check some simple cases
assert True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(1000) == "1", "Error"
assert candidate(150) == "110", "Error"
assert candidate(147) == "1100", "Error"
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
assert candidate(333) == "1001", "Error"
assert candidate(963) == "10010", "Error"
|
solve
|
def solve(N):
"""Given a positive integer N, return the total sum of its digits in binary.
Example
For N = 1000, the sum of digits will be 1 the output should be "1".
For N = 150, the sum of digits will be 6 the output should be "110".
For N = 147, the sum of digits will be 12 the output should be "1100".
Variables:
@N integer
Constraints: 0 ≤ N ≤ 10000.
Output:
a string of binary number
"""
return bin(sum(int(i) for i in str(N)))[2:]
|
HumanEval/85
|
def add(lst):
"""Given a non-empty list of integers lst. add the even elements that are at odd indices..
Examples:
add([4, 2, 6, 7]) ==> 2
"""
|
return sum([lst[i] for i in range(1, len(lst), 2) if lst[i]%2 == 0])
|
def check(candidate):
# Check some simple cases
assert candidate([4, 88]) == 88
assert candidate([4, 5, 6, 7, 2, 122]) == 122
assert candidate([4, 0, 6, 7]) == 0
assert candidate([4, 4, 6, 8]) == 12
# Check some edge cases that are easy to work out by hand.
|
add
|
def add(lst):
"""Given a non-empty list of integers lst. add the even elements that are at odd indices..
Examples:
add([4, 2, 6, 7]) ==> 2
"""
return sum([lst[i] for i in range(1, len(lst), 2) if lst[i]%2 == 0])
|
HumanEval/86
|
def anti_shuffle(s):
"""
Write a function that takes a string and returns an ordered version of it.
Ordered version of string, is a string where all words (separated by space)
are replaced by a new word where all the characters arranged in
ascending order based on ascii value.
Note: You should keep the order of words and blank spaces in the sentence.
For example:
anti_shuffle('Hi') returns 'Hi'
anti_shuffle('hello') returns 'ehllo'
anti_shuffle('Hello World!!!') returns 'Hello !!!Wdlor'
"""
|
return ' '.join([''.join(sorted(list(i))) for i in s.split(' ')])
|
def check(candidate):
# Check some simple cases
assert candidate('Hi') == 'Hi'
assert candidate('hello') == 'ehllo'
assert candidate('number') == 'bemnru'
assert candidate('abcd') == 'abcd'
assert candidate('Hello World!!!') == 'Hello !!!Wdlor'
assert candidate('') == ''
assert candidate('Hi. My name is Mister Robot. How are you?') == '.Hi My aemn is Meirst .Rboot How aer ?ouy'
# Check some edge cases that are easy to work out by hand.
assert True
|
anti_shuffle
|
def anti_shuffle(s):
"""
Write a function that takes a string and returns an ordered version of it.
Ordered version of string, is a string where all words (separated by space)
are replaced by a new word where all the characters arranged in
ascending order based on ascii value.
Note: You should keep the order of words and blank spaces in the sentence.
For example:
anti_shuffle('Hi') returns 'Hi'
anti_shuffle('hello') returns 'ehllo'
anti_shuffle('Hello World!!!') returns 'Hello !!!Wdlor'
"""
return ' '.join([''.join(sorted(list(i))) for i in s.split(' ')])
|
HumanEval/87
|
def get_row(lst, x):
"""
You are given a 2 dimensional data, as a nested lists,
which is similar to matrix, however, unlike matrices,
each row may contain a different number of columns.
Given lst, and integer x, find integers x in the list,
and return list of tuples, [(x1, y1), (x2, y2) ...] such that
each tuple is a coordinate - (row, columns), starting with 0.
Sort coordinates initially by rows in ascending order.
Also, sort coordinates of the row by columns in descending order.
Examples:
get_row([
[1,2,3,4,5,6],
[1,2,3,4,1,6],
[1,2,3,4,5,1]
], 1) == [(0, 0), (1, 4), (1, 0), (2, 5), (2, 0)]
get_row([], 1) == []
get_row([[], [1], [1, 2, 3]], 3) == [(2, 2)]
"""
|
coords = [(i, j) for i in range(len(lst)) for j in range(len(lst[i])) if lst[i][j] == x]
return sorted(sorted(coords, key=lambda x: x[1], reverse=True), key=lambda x: x[0])
|
def check(candidate):
# Check some simple cases
assert candidate([
[1,2,3,4,5,6],
[1,2,3,4,1,6],
[1,2,3,4,5,1]
], 1) == [(0, 0), (1, 4), (1, 0), (2, 5), (2, 0)]
assert candidate([
[1,2,3,4,5,6],
[1,2,3,4,5,6],
[1,2,3,4,5,6],
[1,2,3,4,5,6],
[1,2,3,4,5,6],
[1,2,3,4,5,6]
], 2) == [(0, 1), (1, 1), (2, 1), (3, 1), (4, 1), (5, 1)]
assert candidate([
[1,2,3,4,5,6],
[1,2,3,4,5,6],
[1,1,3,4,5,6],
[1,2,1,4,5,6],
[1,2,3,1,5,6],
[1,2,3,4,1,6],
[1,2,3,4,5,1]
], 1) == [(0, 0), (1, 0), (2, 1), (2, 0), (3, 2), (3, 0), (4, 3), (4, 0), (5, 4), (5, 0), (6, 5), (6, 0)]
assert candidate([], 1) == []
assert candidate([[1]], 2) == []
assert candidate([[], [1], [1, 2, 3]], 3) == [(2, 2)]
# Check some edge cases that are easy to work out by hand.
assert True
|
get_row
|
def get_row(lst, x):
"""
You are given a 2 dimensional data, as a nested lists,
which is similar to matrix, however, unlike matrices,
each row may contain a different number of columns.
Given lst, and integer x, find integers x in the list,
and return list of tuples, [(x1, y1), (x2, y2) ...] such that
each tuple is a coordinate - (row, columns), starting with 0.
Sort coordinates initially by rows in ascending order.
Also, sort coordinates of the row by columns in descending order.
Examples:
get_row([
[1,2,3,4,5,6],
[1,2,3,4,1,6],
[1,2,3,4,5,1]
], 1) == [(0, 0), (1, 4), (1, 0), (2, 5), (2, 0)]
get_row([], 1) == []
get_row([[], [1], [1, 2, 3]], 3) == [(2, 2)]
"""
coords = [(i, j) for i in range(len(lst)) for j in range(len(lst[i])) if lst[i][j] == x]
return sorted(sorted(coords, key=lambda x: x[1], reverse=True), key=lambda x: x[0])
|
HumanEval/88
|
def sort_array(array):
"""
Given an array of non-negative integers, return a copy of the given array after sorting,
you will sort the given array in ascending order if the sum( first index value, last index value) is odd,
or sort it in descending order if the sum( first index value, last index value) is even.
Note:
* don't change the given array.
Examples:
* sort_array([]) => []
* sort_array([5]) => [5]
* sort_array([2, 4, 3, 0, 1, 5]) => [0, 1, 2, 3, 4, 5]
* sort_array([2, 4, 3, 0, 1, 5, 6]) => [6, 5, 4, 3, 2, 1, 0]
"""
|
return [] if len(array) == 0 else sorted(array, reverse= (array[0]+array[-1]) % 2 == 0)
|
def check(candidate):
# Check some simple cases
assert True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate([]) == [], "Error"
assert candidate([5]) == [5], "Error"
assert candidate([2, 4, 3, 0, 1, 5]) == [0, 1, 2, 3, 4, 5], "Error"
assert candidate([2, 4, 3, 0, 1, 5, 6]) == [6, 5, 4, 3, 2, 1, 0], "Error"
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
assert candidate([2, 1]) == [1, 2], "Error"
assert candidate([15, 42, 87, 32 ,11, 0]) == [0, 11, 15, 32, 42, 87], "Error"
assert candidate([21, 14, 23, 11]) == [23, 21, 14, 11], "Error"
|
sort_array
|
def sort_array(array):
"""
Given an array of non-negative integers, return a copy of the given array after sorting,
you will sort the given array in ascending order if the sum( first index value, last index value) is odd,
or sort it in descending order if the sum( first index value, last index value) is even.
Note:
* don't change the given array.
Examples:
* sort_array([]) => []
* sort_array([5]) => [5]
* sort_array([2, 4, 3, 0, 1, 5]) => [0, 1, 2, 3, 4, 5]
* sort_array([2, 4, 3, 0, 1, 5, 6]) => [6, 5, 4, 3, 2, 1, 0]
"""
return [] if len(array) == 0 else sorted(array, reverse= (array[0]+array[-1]) % 2 == 0)
|
HumanEval/89
|
def encrypt(s):
"""Create a function encrypt that takes a string as an argument and
returns a string encrypted with the alphabet being rotated.
The alphabet should be rotated in a manner such that the letters
shift down by two multiplied to two places.
For example:
encrypt('hi') returns 'lm'
encrypt('asdfghjkl') returns 'ewhjklnop'
encrypt('gf') returns 'kj'
encrypt('et') returns 'ix'
"""
|
d = 'abcdefghijklmnopqrstuvwxyz'
out = ''
for c in s:
if c in d:
out += d[(d.index(c)+2*2) % 26]
else:
out += c
return out
|
def check(candidate):
# Check some simple cases
assert candidate('hi') == 'lm', "This prints if this assert fails 1 (good for debugging!)"
assert candidate('asdfghjkl') == 'ewhjklnop', "This prints if this assert fails 1 (good for debugging!)"
assert candidate('gf') == 'kj', "This prints if this assert fails 1 (good for debugging!)"
assert candidate('et') == 'ix', "This prints if this assert fails 1 (good for debugging!)"
assert candidate('faewfawefaewg')=='jeiajeaijeiak', "This prints if this assert fails 1 (good for debugging!)"
assert candidate('hellomyfriend')=='lippsqcjvmirh', "This prints if this assert fails 2 (good for debugging!)"
assert candidate('dxzdlmnilfuhmilufhlihufnmlimnufhlimnufhfucufh')=='hbdhpqrmpjylqmpyjlpmlyjrqpmqryjlpmqryjljygyjl', "This prints if this assert fails 3 (good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate('a')=='e', "This prints if this assert fails 2 (also good for debugging!)"
|
encrypt
|
def encrypt(s):
"""Create a function encrypt that takes a string as an argument and
returns a string encrypted with the alphabet being rotated.
The alphabet should be rotated in a manner such that the letters
shift down by two multiplied to two places.
For example:
encrypt('hi') returns 'lm'
encrypt('asdfghjkl') returns 'ewhjklnop'
encrypt('gf') returns 'kj'
encrypt('et') returns 'ix'
"""
d = 'abcdefghijklmnopqrstuvwxyz'
out = ''
for c in s:
if c in d:
out += d[(d.index(c)+2*2) % 26]
else:
out += c
return out
|
HumanEval/9
|
from typing import List, Tuple
def rolling_max(numbers: List[int]) -> List[int]:
""" From a given list of integers, generate a list of rolling maximum element found until given moment
in the sequence.
>>> rolling_max([1, 2, 3, 2, 3, 4, 2])
[1, 2, 3, 3, 3, 4, 4]
"""
|
running_max = None
result = []
for n in numbers:
if running_max is None:
running_max = n
else:
running_max = max(running_max, n)
result.append(running_max)
return result
|
METADATA = {
'author': 'jt',
'dataset': 'test'
}
def check(candidate):
assert candidate([]) == []
assert candidate([1, 2, 3, 4]) == [1, 2, 3, 4]
assert candidate([4, 3, 2, 1]) == [4, 4, 4, 4]
assert candidate([3, 2, 3, 100, 3]) == [3, 3, 3, 100, 100]
|
rolling_max
|
from typing import List, Tuple
def rolling_max(numbers: List[int]) -> List[int]:
""" From a given list of integers, generate a list of rolling maximum element found until given moment
in the sequence.
>>> rolling_max([1, 2, 3, 2, 3, 4, 2])
[1, 2, 3, 3, 3, 4, 4]
"""
running_max = None
result = []
for n in numbers:
if running_max is None:
running_max = n
else:
running_max = max(running_max, n)
result.append(running_max)
return result
|
HumanEval/90
|
def next_smallest(lst):
"""
You are given a list of integers.
Write a function next_smallest() that returns the 2nd smallest element of the list.
Return None if there is no such element.
next_smallest([1, 2, 3, 4, 5]) == 2
next_smallest([5, 1, 4, 3, 2]) == 2
next_smallest([]) == None
next_smallest([1, 1]) == None
"""
|
lst = sorted(set(lst))
return None if len(lst) < 2 else lst[1]
|
def check(candidate):
# Check some simple cases
assert candidate([1, 2, 3, 4, 5]) == 2
assert candidate([5, 1, 4, 3, 2]) == 2
assert candidate([]) == None
assert candidate([1, 1]) == None
assert candidate([1,1,1,1,0]) == 1
assert candidate([1, 0**0]) == None
assert candidate([-35, 34, 12, -45]) == -35
# Check some edge cases that are easy to work out by hand.
assert True
|
next_smallest
|
def next_smallest(lst):
"""
You are given a list of integers.
Write a function next_smallest() that returns the 2nd smallest element of the list.
Return None if there is no such element.
next_smallest([1, 2, 3, 4, 5]) == 2
next_smallest([5, 1, 4, 3, 2]) == 2
next_smallest([]) == None
next_smallest([1, 1]) == None
"""
lst = sorted(set(lst))
return None if len(lst) < 2 else lst[1]
|
HumanEval/91
|
def is_bored(S):
"""
You'll be given a string of words, and your task is to count the number
of boredoms. A boredom is a sentence that starts with the word "I".
Sentences are delimited by '.', '?' or '!'.
For example:
>>> is_bored("Hello world")
0
>>> is_bored("The sky is blue. The sun is shining. I love this weather")
1
"""
|
import re
sentences = re.split(r'[.?!]\s*', S)
return sum(sentence[0:2] == 'I ' for sentence in sentences)
|
def check(candidate):
# Check some simple cases
assert candidate("Hello world") == 0, "Test 1"
assert candidate("Is the sky blue?") == 0, "Test 2"
assert candidate("I love It !") == 1, "Test 3"
assert candidate("bIt") == 0, "Test 4"
assert candidate("I feel good today. I will be productive. will kill It") == 2, "Test 5"
assert candidate("You and I are going for a walk") == 0, "Test 6"
# Check some edge cases that are easy to work out by hand.
assert True, "This prints if this assert fails 2 (also good for debugging!)"
|
is_bored
|
def is_bored(S):
"""
You'll be given a string of words, and your task is to count the number
of boredoms. A boredom is a sentence that starts with the word "I".
Sentences are delimited by '.', '?' or '!'.
For example:
>>> is_bored("Hello world")
0
>>> is_bored("The sky is blue. The sun is shining. I love this weather")
1
"""
import re
sentences = re.split(r'[.?!]\s*', S)
return sum(sentence[0:2] == 'I ' for sentence in sentences)
|
HumanEval/92
|
def any_int(x, y, z):
'''
Create a function that takes 3 numbers.
Returns true if one of the numbers is equal to the sum of the other two, and all numbers are integers.
Returns false in any other cases.
Examples
any_int(5, 2, 7) ➞ True
any_int(3, 2, 2) ➞ False
any_int(3, -2, 1) ➞ True
any_int(3.6, -2.2, 2) ➞ False
'''
|
if isinstance(x,int) and isinstance(y,int) and isinstance(z,int):
if (x+y==z) or (x+z==y) or (y+z==x):
return True
return False
return False
|
def check(candidate):
# Check some simple cases
assert candidate(2, 3, 1)==True, "This prints if this assert fails 1 (good for debugging!)"
assert candidate(2.5, 2, 3)==False, "This prints if this assert fails 2 (good for debugging!)"
assert candidate(1.5, 5, 3.5)==False, "This prints if this assert fails 3 (good for debugging!)"
assert candidate(2, 6, 2)==False, "This prints if this assert fails 4 (good for debugging!)"
assert candidate(4, 2, 2)==True, "This prints if this assert fails 5 (good for debugging!)"
assert candidate(2.2, 2.2, 2.2)==False, "This prints if this assert fails 6 (good for debugging!)"
assert candidate(-4, 6, 2)==True, "This prints if this assert fails 7 (good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate(2,1,1)==True, "This prints if this assert fails 8 (also good for debugging!)"
assert candidate(3,4,7)==True, "This prints if this assert fails 9 (also good for debugging!)"
assert candidate(3.0,4,7)==False, "This prints if this assert fails 10 (also good for debugging!)"
|
any_int
|
def any_int(x, y, z):
'''
Create a function that takes 3 numbers.
Returns true if one of the numbers is equal to the sum of the other two, and all numbers are integers.
Returns false in any other cases.
Examples
any_int(5, 2, 7) ➞ True
any_int(3, 2, 2) ➞ False
any_int(3, -2, 1) ➞ True
any_int(3.6, -2.2, 2) ➞ False
'''
if isinstance(x,int) and isinstance(y,int) and isinstance(z,int):
if (x+y==z) or (x+z==y) or (y+z==x):
return True
return False
return False
|
HumanEval/93
|
def encode(message):
"""
Write a function that takes a message, and encodes in such a
way that it swaps case of all letters, replaces all vowels in
the message with the letter that appears 2 places ahead of that
vowel in the english alphabet.
Assume only letters.
Examples:
>>> encode('test')
'TGST'
>>> encode('This is a message')
'tHKS KS C MGSSCGG'
"""
|
vowels = "aeiouAEIOU"
vowels_replace = dict([(i, chr(ord(i) + 2)) for i in vowels])
message = message.swapcase()
return ''.join([vowels_replace[i] if i in vowels else i for i in message])
|
def check(candidate):
# Check some simple cases
assert candidate('TEST') == 'tgst', "This prints if this assert fails 1 (good for debugging!)"
assert candidate('Mudasir') == 'mWDCSKR', "This prints if this assert fails 2 (good for debugging!)"
assert candidate('YES') == 'ygs', "This prints if this assert fails 3 (good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate('This is a message') == 'tHKS KS C MGSSCGG', "This prints if this assert fails 2 (also good for debugging!)"
assert candidate("I DoNt KnOw WhAt tO WrItE") == 'k dQnT kNqW wHcT Tq wRkTg', "This prints if this assert fails 2 (also good for debugging!)"
|
encode
|
def encode(message):
"""
Write a function that takes a message, and encodes in such a
way that it swaps case of all letters, replaces all vowels in
the message with the letter that appears 2 places ahead of that
vowel in the english alphabet.
Assume only letters.
Examples:
>>> encode('test')
'TGST'
>>> encode('This is a message')
'tHKS KS C MGSSCGG'
"""
vowels = "aeiouAEIOU"
vowels_replace = dict([(i, chr(ord(i) + 2)) for i in vowels])
message = message.swapcase()
return ''.join([vowels_replace[i] if i in vowels else i for i in message])
|
HumanEval/94
|
def skjkasdkd(lst):
"""You are given a list of integers.
You need to find the largest prime value and return the sum of its digits.
Examples:
For lst = [0,3,2,1,3,5,7,4,5,5,5,2,181,32,4,32,3,2,32,324,4,3] the output should be 10
For lst = [1,0,1,8,2,4597,2,1,3,40,1,2,1,2,4,2,5,1] the output should be 25
For lst = [1,3,1,32,5107,34,83278,109,163,23,2323,32,30,1,9,3] the output should be 13
For lst = [0,724,32,71,99,32,6,0,5,91,83,0,5,6] the output should be 11
For lst = [0,81,12,3,1,21] the output should be 3
For lst = [0,8,1,2,1,7] the output should be 7
"""
|
def isPrime(n):
for i in range(2,int(n**0.5)+1):
if n%i==0:
return False
return True
maxx = 0
i = 0
while i < len(lst):
if(lst[i] > maxx and isPrime(lst[i])):
maxx = lst[i]
i+=1
result = sum(int(digit) for digit in str(maxx))
return result
|
def check(candidate):
# Check some simple cases
assert candidate([0,3,2,1,3,5,7,4,5,5,5,2,181,32,4,32,3,2,32,324,4,3]) == 10, "This prints if this assert fails 1 (good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate([1,0,1,8,2,4597,2,1,3,40,1,2,1,2,4,2,5,1]) == 25, "This prints if this assert fails 2 (also good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate([1,3,1,32,5107,34,83278,109,163,23,2323,32,30,1,9,3]) == 13, "This prints if this assert fails 3 (also good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate([0,724,32,71,99,32,6,0,5,91,83,0,5,6]) == 11, "This prints if this assert fails 4 (also good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate([0,81,12,3,1,21]) == 3, "This prints if this assert fails 5 (also good for debugging!)"
# Check some edge cases that are easy to work out by hand.
assert candidate([0,8,1,2,1,7]) == 7, "This prints if this assert fails 6 (also good for debugging!)"
assert candidate([8191]) == 19, "This prints if this assert fails 7 (also good for debugging!)"
assert candidate([8191, 123456, 127, 7]) == 19, "This prints if this assert fails 8 (also good for debugging!)"
assert candidate([127, 97, 8192]) == 10, "This prints if this assert fails 9 (also good for debugging!)"
|
skjkasdkd
|
def skjkasdkd(lst):
"""You are given a list of integers.
You need to find the largest prime value and return the sum of its digits.
Examples:
For lst = [0,3,2,1,3,5,7,4,5,5,5,2,181,32,4,32,3,2,32,324,4,3] the output should be 10
For lst = [1,0,1,8,2,4597,2,1,3,40,1,2,1,2,4,2,5,1] the output should be 25
For lst = [1,3,1,32,5107,34,83278,109,163,23,2323,32,30,1,9,3] the output should be 13
For lst = [0,724,32,71,99,32,6,0,5,91,83,0,5,6] the output should be 11
For lst = [0,81,12,3,1,21] the output should be 3
For lst = [0,8,1,2,1,7] the output should be 7
"""
def isPrime(n):
for i in range(2,int(n**0.5)+1):
if n%i==0:
return False
return True
maxx = 0
i = 0
while i < len(lst):
if(lst[i] > maxx and isPrime(lst[i])):
maxx = lst[i]
i+=1
result = sum(int(digit) for digit in str(maxx))
return result
|
HumanEval/95
|
def check_dict_case(dict):
"""
Given a dictionary, return True if all keys are strings in lower
case or all keys are strings in upper case, else return False.
The function should return False is the given dictionary is empty.
Examples:
check_dict_case({"a":"apple", "b":"banana"}) should return True.
check_dict_case({"a":"apple", "A":"banana", "B":"banana"}) should return False.
check_dict_case({"a":"apple", 8:"banana", "a":"apple"}) should return False.
check_dict_case({"Name":"John", "Age":"36", "City":"Houston"}) should return False.
check_dict_case({"STATE":"NC", "ZIP":"12345" }) should return True.
"""
|
if len(dict.keys()) == 0:
return False
else:
state = "start"
for key in dict.keys():
if isinstance(key, str) == False:
state = "mixed"
break
if state == "start":
if key.isupper():
state = "upper"
elif key.islower():
state = "lower"
else:
break
elif (state == "upper" and not key.isupper()) or (state == "lower" and not key.islower()):
state = "mixed"
break
else:
break
return state == "upper" or state == "lower"
|
def check(candidate):
# Check some simple cases
assert candidate({"p":"pineapple", "b":"banana"}) == True, "First test error: " + str(candidate({"p":"pineapple", "b":"banana"}))
assert candidate({"p":"pineapple", "A":"banana", "B":"banana"}) == False, "Second test error: " + str(candidate({"p":"pineapple", "A":"banana", "B":"banana"}))
assert candidate({"p":"pineapple", 5:"banana", "a":"apple"}) == False, "Third test error: " + str(candidate({"p":"pineapple", 5:"banana", "a":"apple"}))
assert candidate({"Name":"John", "Age":"36", "City":"Houston"}) == False, "Fourth test error: " + str(candidate({"Name":"John", "Age":"36", "City":"Houston"}))
assert candidate({"STATE":"NC", "ZIP":"12345" }) == True, "Fifth test error: " + str(candidate({"STATE":"NC", "ZIP":"12345" }))
assert candidate({"fruit":"Orange", "taste":"Sweet" }) == True, "Fourth test error: " + str(candidate({"fruit":"Orange", "taste":"Sweet" }))
# Check some edge cases that are easy to work out by hand.
assert candidate({}) == False, "1st edge test error: " + str(candidate({}))
|
check_dict_case
|
def check_dict_case(dict):
"""
Given a dictionary, return True if all keys are strings in lower
case or all keys are strings in upper case, else return False.
The function should return False is the given dictionary is empty.
Examples:
check_dict_case({"a":"apple", "b":"banana"}) should return True.
check_dict_case({"a":"apple", "A":"banana", "B":"banana"}) should return False.
check_dict_case({"a":"apple", 8:"banana", "a":"apple"}) should return False.
check_dict_case({"Name":"John", "Age":"36", "City":"Houston"}) should return False.
check_dict_case({"STATE":"NC", "ZIP":"12345" }) should return True.
"""
if len(dict.keys()) == 0:
return False
else:
state = "start"
for key in dict.keys():
if isinstance(key, str) == False:
state = "mixed"
break
if state == "start":
if key.isupper():
state = "upper"
elif key.islower():
state = "lower"
else:
break
elif (state == "upper" and not key.isupper()) or (state == "lower" and not key.islower()):
state = "mixed"
break
else:
break
return state == "upper" or state == "lower"
|
HumanEval/96
|
def count_up_to(n):
"""Implement a function that takes an non-negative integer and returns an array of the first n
integers that are prime numbers and less than n.
for example:
count_up_to(5) => [2,3]
count_up_to(11) => [2,3,5,7]
count_up_to(0) => []
count_up_to(20) => [2,3,5,7,11,13,17,19]
count_up_to(1) => []
count_up_to(18) => [2,3,5,7,11,13,17]
"""
|
primes = []
for i in range(2, n):
is_prime = True
for j in range(2, i):
if i % j == 0:
is_prime = False
break
if is_prime:
primes.append(i)
return primes
|
def check(candidate):
assert candidate(5) == [2,3]
assert candidate(6) == [2,3,5]
assert candidate(7) == [2,3,5]
assert candidate(10) == [2,3,5,7]
assert candidate(0) == []
assert candidate(22) == [2,3,5,7,11,13,17,19]
assert candidate(1) == []
assert candidate(18) == [2,3,5,7,11,13,17]
assert candidate(47) == [2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43]
assert candidate(101) == [2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97]
|
count_up_to
|
def count_up_to(n):
"""Implement a function that takes an non-negative integer and returns an array of the first n
integers that are prime numbers and less than n.
for example:
count_up_to(5) => [2,3]
count_up_to(11) => [2,3,5,7]
count_up_to(0) => []
count_up_to(20) => [2,3,5,7,11,13,17,19]
count_up_to(1) => []
count_up_to(18) => [2,3,5,7,11,13,17]
"""
primes = []
for i in range(2, n):
is_prime = True
for j in range(2, i):
if i % j == 0:
is_prime = False
break
if is_prime:
primes.append(i)
return primes
|
HumanEval/97
|
def multiply(a, b):
"""Complete the function that takes two integers and returns
the product of their unit digits.
Assume the input is always valid.
Examples:
multiply(148, 412) should return 16.
multiply(19, 28) should return 72.
multiply(2020, 1851) should return 0.
multiply(14,-15) should return 20.
"""
|
return abs(a % 10) * abs(b % 10)
|
def check(candidate):
# Check some simple cases
assert candidate(148, 412) == 16, "First test error: " + str(candidate(148, 412))
assert candidate(19, 28) == 72, "Second test error: " + str(candidate(19, 28))
assert candidate(2020, 1851) == 0, "Third test error: " + str(candidate(2020, 1851))
assert candidate(14,-15) == 20, "Fourth test error: " + str(candidate(14,-15))
assert candidate(76, 67) == 42, "Fifth test error: " + str(candidate(76, 67))
assert candidate(17, 27) == 49, "Sixth test error: " + str(candidate(17, 27))
# Check some edge cases that are easy to work out by hand.
assert candidate(0, 1) == 0, "1st edge test error: " + str(candidate(0, 1))
assert candidate(0, 0) == 0, "2nd edge test error: " + str(candidate(0, 0))
|
multiply
|
def multiply(a, b):
"""Complete the function that takes two integers and returns
the product of their unit digits.
Assume the input is always valid.
Examples:
multiply(148, 412) should return 16.
multiply(19, 28) should return 72.
multiply(2020, 1851) should return 0.
multiply(14,-15) should return 20.
"""
return abs(a % 10) * abs(b % 10)
|
HumanEval/98
|
def count_upper(s):
"""
Given a string s, count the number of uppercase vowels in even indices.
For example:
count_upper('aBCdEf') returns 1
count_upper('abcdefg') returns 0
count_upper('dBBE') returns 0
"""
|
count = 0
for i in range(0,len(s),2):
if s[i] in "AEIOU":
count += 1
return count
|
def check(candidate):
# Check some simple cases
assert candidate('aBCdEf') == 1
assert candidate('abcdefg') == 0
assert candidate('dBBE') == 0
assert candidate('B') == 0
assert candidate('U') == 1
assert candidate('') == 0
assert candidate('EEEE') == 2
# Check some edge cases that are easy to work out by hand.
assert True
|
count_upper
|
def count_upper(s):
"""
Given a string s, count the number of uppercase vowels in even indices.
For example:
count_upper('aBCdEf') returns 1
count_upper('abcdefg') returns 0
count_upper('dBBE') returns 0
"""
count = 0
for i in range(0,len(s),2):
if s[i] in "AEIOU":
count += 1
return count
|
HumanEval/99
|
def closest_integer(value):
'''
Create a function that takes a value (string) representing a number
and returns the closest integer to it. If the number is equidistant
from two integers, round it away from zero.
Examples
>>> closest_integer("10")
10
>>> closest_integer("15.3")
15
Note:
Rounding away from zero means that if the given number is equidistant
from two integers, the one you should return is the one that is the
farthest from zero. For example closest_integer("14.5") should
return 15 and closest_integer("-14.5") should return -15.
'''
|
from math import floor, ceil
if value.count('.') == 1:
# remove trailing zeros
while (value[-1] == '0'):
value = value[:-1]
num = float(value)
if value[-2:] == '.5':
if num > 0:
res = ceil(num)
else:
res = floor(num)
elif len(value) > 0:
res = int(round(num))
else:
res = 0
return res
|
def check(candidate):
# Check some simple cases
assert candidate("10") == 10, "Test 1"
assert candidate("14.5") == 15, "Test 2"
assert candidate("-15.5") == -16, "Test 3"
assert candidate("15.3") == 15, "Test 3"
# Check some edge cases that are easy to work out by hand.
assert candidate("0") == 0, "Test 0"
|
closest_integer
|
def closest_integer(value):
'''
Create a function that takes a value (string) representing a number
and returns the closest integer to it. If the number is equidistant
from two integers, round it away from zero.
Examples
>>> closest_integer("10")
10
>>> closest_integer("15.3")
15
Note:
Rounding away from zero means that if the given number is equidistant
from two integers, the one you should return is the one that is the
farthest from zero. For example closest_integer("14.5") should
return 15 and closest_integer("-14.5") should return -15.
'''
from math import floor, ceil
if value.count('.') == 1:
# remove trailing zeros
while (value[-1] == '0'):
value = value[:-1]
num = float(value)
if value[-2:] == '.5':
if num > 0:
res = ceil(num)
else:
res = floor(num)
elif len(value) > 0:
res = int(round(num))
else:
res = 0
return res
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.